Manual Draytek Vigor 2500 series (page 13 of 27) (English)

729043

Zoom out

Zoom in

1/27

Contents

Vigor2500 Series Introduction

LED indicators and back panels ...............................................

Vigor2500 ............................................................................

Vigor2500We ........................................................................

Vigor2500Wt ........................................................................

Trademarks ..........................................................................

Safety instructions ................................................................

Warranty .............................................................................

European community .............................................................

Be a registered owner ...........................................................

Firmware & tools updates ......................................................

Aim of this chapter ................................................................

Delivery check ......................................................................

Identify your variant ..............................................................

What you need from ISP ........................................................

What you need in your side ....................................................

You must wire ......................................................................

Install Router Tools ...............................................................

Turn on your router ................................................................

Connect to router ..................................................................

Password .............................................................................

Enter router menu .................................................................

Get DSL parameters ..............................................................

For PPPoE/PPPoA users ..........................................................

For MPoA (RFC1483/2684) users ..............................................

Auto detect ATM/DSL Setting ..................................................

Surfing Internet ....................................................................

Wireless LAN Setting .............................................................

Wireless LAN Interface ..........................................................

WEP Security of Wireless LAN Interface ....................................

Access Control of Wireless LAN Interface ..................................

Vigor2500 Series Quick Start Guide

Trouble Shooting for [Cannot get on to the Internet]

Check if the hardware is OK? ..................................................

Can you ping the router from your PC? .....................................

For Windows ........................................................................

For Mac (Terminal) .................................................................

For Win98/Me user ................................................................

For Win2000 user ..................................................................

For WinXP user .....................................................................

For Mac OS 9 user .................................................................

For Mac OS X user .................................................................

Are DSL/ISP settings OK? .......................................................

Check DSL status ..................................................................

Report to people who concerned if still can not work ..................

ADSL Routers

Annex A / Annex B

ISDN Backup

Wireless AP

Vigpr2500

Vigpr2500We

Vigpr2500Wt

The Vigor2500 series is an Internet access solution for your LAN which not only provides shared

web surfing but countless other value-added features such as security, VPN and multimedia support,

all in a reliable one-box solution.

LED Indicators

and Back Panels

Each of the Vigor2500 series router has different front and rear panels. Before

you begin to install, please take a moment to become more familiar with the

LED indicators and rear panels. The following sections describe the models

individually.

Vigor2500

*/*

series introduction

Vigor2500

LED Indicators Descriptions

ACT(Activity)

ADSL

Blink when power is supplied to the router and the router is running normally.

LINE

DATA

ON when the ADSL network is correctly setup

Blinking indicates the DSL protocols start handshaking.The light will

remain still when data transmission is available.

Back Panels Descriptions

LAN 1-4

Link

100Mbps

Local Area Network port status. A steady LED indicates a

connection between computers on your LAN. A flickering LED

indicates data transmission.

Speed status of the Ethernet connection. A steady LED indicates

100Mbps speed. If the Link light is on and the 100Mbps light is off,

the speed is 10Mbps.

VPN

VPN connection status. A steady LED indicates VPN connection is up.

ON/OFF

PWR

ON / turn on power. OFF / switch off the power.

Only the power adapter comes with the package can be connected

to the AC 9V power jack.

To connect Vigor 2500 to an electrical outlet.

P1,P2,P3,P4

These switch ports should be connected to your local PCs.

ADSL

To connect the ADSL cable to your telephone jack.

Factory Reset

The restore default settings: While the router is running (ACT LED blinking), press the

button and hold for more than five seconds. The ACT LED begins to blink rapidly, then

release the button . The router will restart with the factory default configuration.

Vigor2500We

LED Indicators Descriptions

ACT(Activity)

ADSL

Blink when power is supplied to the router and the router is running normally.

LINE

DATA

ON when the ADSL network is correctly setup

Blinking indicates the DSL protocols start handshaking.The light will

remain still when data transmission is available.

Descriptions

LAN 1-4

Link

100Mbps

Local Area Network port status. A steady LED indicates a

connection between computers on your LAN. A flickering LED

indicates data transmission.

Speed status of the Ethernet connection. A steady LED indicates

100Mbps speed. If the Link light is on and the 100Mbps light is off,

the speed is 10Mbps.

VPN

VPN connection status. A steady LED indicates VPN connection is up.

ON when the wireless LAN is ready.A flickering LED indicates data transmission.

ON/OFF

PWR

ON / turn on power. OFF / switch off the power.

Only the power adapter comes with the package can be connected

to the AC 9V power jack.

To connect Vigor 2500We to an electrical outlet.

P1,P2,P3,P4

These switch ports should be connected to your local PCs.

ADSL

To connect the ADSL cable to your telephone jack.

Factory Reset

The restore default settings: While the router is running (ACT LED blinking), press the

button and hold for more than five seconds. The ACT LED begins to blink rapidly, then

release the button . The router will restart with the factory default configuration.

Back Panels

Vigor2500Wt

LED Indicators Descriptions

ACT(Activity)

ADSL

Blink when power is supplied to the router and the router is running normally.

LINE

DATA

ON when the ADSL network is correctly setup

Blinking indicates the DSL protocols start handshaking.The light will

remain still when data transmission is available.

Descriptions

LAN 1-4

Link

100Mbps

Local Area Network port status. A steady LED indicates a

connection between computers on your LAN. A flickering LED

indicates data transmission.

Speed status of the Ethernet connection. A steady LED indicates

100Mbps speed. If the Link light is on and the 100Mbps light is off,

the speed is 10Mbps.

VPN

VPN connection status. A steady LED indicates VPN connection is up.

ON when the wireless LAN is ready.A flickering LED indicates data transmission.

ON/OFF

PWR

ON / turn on power. OFF / switch off the power.

Only the power adapter comes with the package can be connected

to the AC 9V power jack.

To connect Vigor 2500Wt to an electrical outlet.

P1,P2,P3,P4

These switch ports should be connected to your local PCs.

ADSL

To connect the ADSL cable to your telephone jack.

Factory Reset

The restore default settings: While the router is running (ACT LED blinking), press the

button and hold for more than five seconds. The ACT LED begins to blink rapidly, then

release the button . The router will restart with the factory default configuration.

Back Panels

Declarations

protected by copyright. No part may be reproduced, transmitted, transcribed, stored

in a retrieval system, or translated into any language without written permission from

the copyright holders.

The following trademarks are used in this document:

. Microsoft is a registered trademark of Microsoft Corp.

. Windows,Windows 95, 98, Me, NT, 2000, XP and Explorer are trademarks of

Microsoft Corp.

. Apple and Mac OS are registered trademarks of Apple Computer Inc.

Other products may be trademarks or registered trademarks of their respective

manufacturers.

Trademarks

Safety Instructions

Warranty

. Read the installation guide thoroughly before you set up the router.

. The router is a complicated electronic unit that may be repaired only be authorized

and qualified personnel. Do not try to open or repair the router yourself.

. Do not place the router in a damp or humid place, e.g. a bathroom.

. The router should be used in a sheltered area, within a temperature range of +5 to +40

Celsius.

. Do not expose the router to direct sunlight or other heat sources. The housing and

electronic components may be damaged by direct sunlight or heat sources.

. Keep the package out of reach of children.

. When you want to dispose of the router, please follow local regulations on

conservation of the environment.

We warrant to the original end user (purchaser) that the router wil be free from any

defects in workmanship or materials for a period of three (3) years from the date of

purchase from the dealer. Please keep your purchase receipt in a safe place as it

serves as proof of date of purchase. During the warranty period, and upon proof of

purchase, should the product have indications of failure due to faulty workmanship

and/or materials, we will, at our discretion, repair or replace the defective products

or components, without charge for either parts or labor, to whatever extent we

deem necessary tore-store the product to proper operating condition. Any

replacement will consist of a new or re-manufactured functionally equivalent product

of equal value, and will be offered solely at our discretion. This warranty will not

apply if the product is modified, misused, tampered with, damaged by an act of God,

or subjected to abnormal working conditions. The warranty does not cover the

bundled or licensed software of other vendors. Defects which do not significantly

affect the usability of the product will not be covered by the warranty.We reserve

the right to revise the manual and online documentation and to make changes

from time to time in the contents hereof without obligation to notify any person of

such revision or changes.

European Community

Be A Registered

Owner

Firmware & Tools

Updates

Hereby, we declare that the router is in compliance with the essential requirements

and other relevant provisions of R&TTE Directive 99/5/EC.

Web registration is preferred. You can register your Vigor router via http://

www.draytek.com.tw . Alternatively, fill in the registration card and mail it to the

address found on the reverse side of the card.

Due to the continuous evolution of DrayTek ADSL & Router technology, all

routers will be regularly upgraded. Please consult the DrayTek web site for more

information on newest firmware, tools and documents.

http://www.draytek.com.tw

Series Quick Start Guide

Identify your variant

Delivery check

Aim of this

chapter

Quickly connect your router to the Internet

Check your router package for the following items :

The Router

1 printed Quick Start Guide with warranty/ registration card

1 CD includes details of User Manual and installation procedure in electronic form,

released firmware and utilities

1 AC/DC power supply adapter (black)

1 Ethernet LAN cable (blue) for connection to a computer or hub

1 ADSL line cable (RJ-11 or RJ-45, black)

1 external antenna for Vigor2500We/Wt

Your router package should contain all these items. If any item is

missing or damaged, contact your dealer or our Customer Service

Department immediately.

The Vigor2500 series all contain Annex A / Annex B models,

please check if the package is suitble for your using.

You can get the information from bottom of Vigor2500

series router.

Annex A : connecting to an analog POTS line

Annex B : connecting to a digital ISDN line

Vigor2500

What you

need from ISP

DSL Parameters

It should be provided at least the following information from ISP :

1. The VPI/VCI of the virtual channel to use on the DSL line

2. Protocol : PPPoE, PPPoA or MPoA (RFC1483/2684)

3. Encapsulation Method : LLC/SNAP or VCMUX

4. Modulation Method : T1.413, G.lite, G.DMT

DSL line

Depending on the variant Vigor2500 series you purchased, the following DSL

service must be available at your local premisses:

ADSL/POTS : ADSL service must be enabled on your POTS telephone line.

ADSL/ISDN : ADSL service must be enabled on your ISDN telephone line.

(Vgior2500 series provides multimode which can automatically detect)

Local networking

To use the Ethernet port(s) you need at least:

One PC with an Ethernet Card installed.

TCP/IP protocol suite

For TCP/IP, your PC can set either static IP or DHCP to ask IP from router. The

default IP of router is 192.168.1.1. If static IP is chosen, you can set 192.168.1.x

for your PC.

A Web browser

Example:

VPI/VCI = 0/33

Protocol = PPPoA

Encapsulation Method = VCMUX

Modulation Method = G.DMT

Username/Password

Only for PPPoE/PPPoA mode users

Fixed IP Address/ Subnet Mask/ Gateway IP Address

Only for MPoA mode users. Some ISP will use DHCP method to provide IP

address for MPoA mode users, then users do not need to know the fixed IP

address.

If you do not know these information in detail, please contact your ISP to get

these information.

What you need

in your side

Ethernet port (between router and PC), DSL port and Power port as below:

You must wire

Vigor2500

Vigor2500We/Wt

Install ‘ Router

Tools ‘

This tool which provides ‘Quick StartWizard’, ‘Firmware Upgrade Program ’

and ‘Syslog Monitor’ client is in the attached CD. It supportsWindows, Mac OS

8/9 and Mac OS X.

Turn on your router

Once all previous steps are completed, turn on your router. After Power is on,

the ‘ACT’ LED and corresponding LAN port LED will light.

If the LEDs do not light normally, please refer to section A, ‘Trouble Shooting’,

for furthur information.

Connect to

Router

If the PC is set to obtain IP address automatically (recommended), you can

useWindows winipcfg.exe or ipconfig.exe to check if it has obtained an IP address

from the router. If not, please reboot PC and ensure that it has obtained an IP address

from the router.

Then you can use “Quick Start Wizard” to confige router or connect to router via

Web browser directly. The default IP of router is 192.168.1.1.

Password

The default password is null. You can press ‘OK’ to pass it.

Once past the password prompt, you will now see the router’s main menu:

(Example: Vigor2500)

Enter Router

Set DSL Parameters

Click on ‘Internet Access Setup’ on the right-hand menu.

You will find two items : PPPoE/PPPoA and MPoA (RFC 1483/2684).

Then You can continuely enter setting menu according to the protocol which ISP

assigns.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2500 series in the language / languages: English as an attachment in your email.

The manual is 4,34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Draytek Vigor 2500 series Manual

Product: