680257

Draytek Vigor 2100VG series Manual

118
Zoom out
Zoom in
Previous page
1/134
Next page
Wireless LAN Setup
12
-
5
- Disable: Turn off the encryption mechanism.
- WEP Only: Accepts only WEP clients and the encryption key should be
entered in WEP Key.
- WEP or WPA/PSK: Accepts WEP and WPA clients simultaneously and the
encryption key should be entered in WEP Key and PSK respectively.
- WPA/PSK Only: Accepts only WPA clients and the encryption key should
be entered in PSK.
2. WPA Encryption:
The WPA encrypts each frame transmitted from the radio using the
pre-shared key (PSK) which entered from this panel.
Pre-Shared Key (PSK): Either 8~63 ASCII characters or 64 Hexadecimal
digits leading by 0x can be entered. For example "0123456789ABCD...." or
"0x321253abcde.....".
3. WEP Encryption:
- 64-Bit: For 64bits WEP key, either 5 ASCII characters or 10 hexadecimal
digitals leading by 0x can be entered. For example, ABCDE or
0x4142434445.
- 128-Bit: For 128bits WEP key, either 13 ASCII characters or 26
hexadecimal digits leading by 0x can be entered. For example,
ABCDEFGHIJKLM or 0x4142434445464748494A4B4C4D.
NOTE: 128 bits WEP is most secure, but has more encryption/decryption
overhead. Note that all wireless devices must support the same WEP
encryption bit size and have the same key. Four keys can be entered here,
but only one key can be selected at a time. The keys can be entered in
ASCII or Hexadecimal. Click the circle under Use next to the key you wish to
use.
4. Click OK to save settings.
12.4 Configuring the Access Control
For additional security of wireless access, the Access Control facility allows
you to restrict the network access right by controlling the wireless LAN MAC
address of client. Only the valid MAC address which has been configured
can access the wireless LAN interface. By clicking the Access Control, a
new web page will appear, as depicted below, so that you could edit the
clients' MAC addresses to control their access rights.
… 118 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2100VG series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2100VG series in the language / languages: English as an attachment in your email.

The manual is 3,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info