680255
74
Zoom out
Zoom in
Previous page
1/129
Next page
4-15
Remote Access
TCP/IP Network Settings
The following settings are required for proper LAN-to-LAN operation.
My WAN IP: In most cases you may accept the default value
0.0.0.0 in this field. The router will then get a WAN IP address
from the remote router during the IPCP negotiation phase. If
the WAN IP address is fixed by remote, specify the fixed IP
address here.
Remote Gateway IP: Specify the IP address of the remote
router.
Remote Network IP: Specify the network identification of the
remote network. For example, 192.168.1.0 is a network
identification of a class-C subnet with netmask 255.255.255.0 (/
24).
Remote Network Mask: Specify the netmask of the remote
network.
RIP Direction: The option specify the direction of RIP (Rout-
ing Information Protocol) packets through the ISDN WAN con-
nection.
RIP Version: Select the RIP protocol version. Specify Ver. 2
for greatest compatibility.
Exchange RIP Packets: The router has two local IP networks:
the 1st subnet and 2nd subnet. Here you set which subnet will
exchange RIP packets with the remote network. Usually set to
1st subnet for routing between the 1st subnet and the remote
network.
Recall the LAN-to-LAN example described in section 4.3. The LAN-
to-LAN Dialer Profile could be configured as below.
74


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2000 in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info