680255
18
Zoom out
Zoom in
Previous page
1/129
Next page
2-2
Installation & Setup
2.1 Before You Begin
1. Use only the power adapter supplied by DrayTek Corp. Using an
incorrectly rated power adapter will result in damage to the router.
2. Know the type of interface provided by your ISP or telecom. The
standard model only supports the ISDN BRI S/T-interface. If you are
an ISDN U-interface user, you need to order a U-interface model. If
you are an ISDN S/T-interface user, you should have an NT-1 or NT-1
plus provided by your ISP or telecom. Also, make sure the ISDN
line is available.
3. In case of emergency, unplug the power adapter first.
4. Locate the device in a clean location. Do not block the ventilating
slots on the rear panel.
5. Cables must be attached to the correct ports; to do otherwise
may result in damage to the router. Keep cables away from
walkways.
6. If you use S/T-interface, do not extend the ISDN line greater than
100 meters from the NT-1 (NT-1 plus) box and the router.
7. If you use DSL/Cable, check that your subscribed DSL/Cable
modem supports the Ethernet interface for connecting to your PC.
If not, you will be unable to connect it to the router.
8. Before you set up the router, you need to know the default
settings of Vigor2000 Router as shown below:-
Factory Default Settings:
Default IP Network Settings:
IP Address: 192.168.1.1
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 2000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 2000 in the language / languages: English as an attachment in your email.

The manual is 5,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info