680252

Draytek Vigor 1000 series Manual

260
Zoom out
Zoom in
Previous page
1/276
Next page
Vigor1000 Series User’s Guide
252
Transmit Size Counters
Tx 64 Bytes - Display the number of 64-byte frames in
good and bad packets transmitted.
Tx 65-127 Bytes - Display the number of 65 ~ 127-byte
frames in good and bad packets transmitted.
Tx 128-255 Bytes - Display the number of 128 ~ 255-byte
frames in good and bad packets transmitted.
Tx 256-511 Bytes - Display the number of 256 ~ 511-byte
frames in good and bad packets transmitted.
Tx 512-1023 Bytes - Display the number of 512 ~
1023-byte frames in good and bad packets transmitted.
Tx 1024- 1526 Bytes - Display the number of 1024 ~
1522-byt frames in good and bad packets transmitted.
Tx 1527 Bytes - Display the number of 1527-byte frames
in good and bad packets transmitted.
Transmit Queue Counters
Tx Low - Display the low queue counter of the packet
transmitted.
Tx Normal - Display the normal queue counter of the
packet transmitted.
Tx Medium - Display the medium queue counter of the
packet received.
Tx High - Display the high queue counter of the packet
received.
Transmit Error Counters
Tx Drops - Display the number of frames dropped due to
excessive collision, late collision, or frame aging.
Tx lat/Exc.Coll. - Display the number of Frames late
collision or excessive collision Error, which switch
transmitted.
4
4
.
.
1
1
6
6
.
.
7
7
M
M
A
A
C
C
A
A
d
d
d
d
r
r
e
e
s
s
s
s
T
T
a
a
b
b
l
l
e
e
The MAC Address Table contains up to 8192 entries, and is sorted first by VLAN ID, then by
MAC address.
Each page shows up to 999 entries from the MAC table, default being 20, selected through the
"entries per page" input field. When first visited, the web page will show the first 20 entries
from the beginning of the MAC Table. The first displayed will be the one with the lowest
VLAN ID and the lowest MAC address found in the MAC Table.
The Start from MAC address and VLAN input fields allow the user to select the starting
point in the MAC Table. Clicking the Refresh button will update the displayed table starting
from that or the closest next MAC Table match. In addition, the two input fields will assume
the value of the first displayed entry, allowing for continuous refresh with the same start
address.
The button >> will use the last entry of the currently displayed VLAN/MAC address pairs as a
basis for the next lookup. When the end is reached the text "no more entries" is shown in the
displayed table, use the l<< button to start over.
… 260 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Draytek Vigor 1000 series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Draytek Vigor 1000 series in the language / languages: English as an attachment in your email.

The manual is 6,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info