499406

Dr. Kern Prestige Manual

37
Zoom out
Zoom in
Previous page
1/40
Next page
With a box or fixed spanner (wrench) with which you
grasp the lug nuts of lugs (M8), you can change the
tension of the tension springs.
Turning toward the right results in an increase; turning
toward the left results in a reduction of the spring tension.
Once the spring tension has been optimally adjusted,
the face panel is re-installed.
Please note: Operation of the system without a
properly installed face panel must be avoided.
lug with nut M8
head end
Replacement of the filter mats
The air siphoned into the canopy unit and the base is
drawn through filter mats in the air intake area. These
mats should be replaced as needed when they have
become excessively soiled.
To replace filter mats in the canopy unit, the acrylic plate
must be swung down as described and set down on
the bench. The filter mat, which lies on the inner side of
the front chassis member and is fastened to an adhesive
surface, is then pulled from this adhesive surface.
After the new filter mat has been pressed onto the
adhesive surface, the acrylic plate of the canopy must
be locked into place.
When this has been done, the filter mat in the intake
opening is pushed towards the inside.
The filter mats located on the sides in the bench pan
are replaced after the disassembly of the acrylic plate
of the bench (see previous description). These filter
mats are also held in place by the adhesive surfaces
located on the inner sides.
An additional air intake area for the cooling of the ballast
units as well as of the control unit is located in the base
panel below the bench.
To replace the filter mat, first disassemble the base panel
as described in the previous section.
The threaded fasteners for the front housing plate at the
foot-end sections are located behind the base panel.
Unscrew these on both sides. Finally pull the housing out
of the supporting groove in the front bench chassis member.
tension spring system
Note direction of turn!
right turn +
left turn -
filter mat
canopy
filter mat
adhesive strip
acrylic plate, canopy, with
mounting strip
side air intake with filter mats
on inner side
acrylic plate, bench
37english
… 37 …


Need help? Post your question in this forum.

Forumrules
1

Forum

dr.-kern-prestige

Reset search

  • I have a 2005 dr kern prestige tan bed, looking for used facial glass & u.v. Filters & possibly complete asm including retaining brackets Submitted on 9-12-2021 at 05:33

    Reply Report abuse

  • I have a 2005 dr kern prestige tan bed , looking for facial glass or complete u.v. Glass & retainer Submitted on 9-12-2021 at 05:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Prestige in the language / languages: English, German as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info