499406

Dr. Kern Prestige Manual

32
Zoom out
Zoom in
Previous page
1/40
Next page
Install, finally, the inside hose connecting flange to the
cover (4 threaded fasteners Ø 4.2).
On the outside, the side cover is then placed onto the
body cooler frame with the air channel and bolted from
the inside (4 threaded fasteners Ø 4.2).
Via the air channel, the cool air from the air conditioning
unit is guided directly to the air intake side of the body
cooler.
From the inside, the smaller cover is fastened with two
threaded fasteners Ø 4.2 x 9.5 to the rear side of the air
channel.
Before the air conditioning unit is pushed below the
bench at the foot end, the cool air hose (Ø 100 mm)
must be installed between the air conditioning unit and
the connecting flange to the side cover.
Push the hose onto the corresponding connecting flange
and fasten it with the hose clamps provided.
As a last step, plug the connecting terminal of the air
conditioning unit into the corresponding socket of the
control unit on the electrical plug-in module and then
push the air conditioning unit under the bench.
Cover the base with the base cover before you re-start
the system.
Filter mat replacement in the
air-conditioning unit
In addition to the filter mats in the canopy unit and base,
it is necessary to clean the dust filter screen in the air
intake area of the air conditioning unit from time to time
depending on degree of soiling.
To do so, disassemble the base cover as described
and pull the air conditioning unit under the bench
forward.
Open the cover over the filter unit and pull the dust filter
screen upward and out.
The filter can be cleaned by vacuuming or, in case of
excessive soiling, washed in lukewarm water (40°C).
Any moisture left on the unit must be thoroughly shaken
free before the filter is re-installed using the same
procedure in reverse.
Supplementary body cooler at the head
end
In addition to the standard body cooler at the foot end of
the system, it is possible to install a second body cooler
on the side cover at the head end.
First, disassemble the base cover as described and
remove the stoppers from the mounting holes in the
side cover.
side cover with
air channel
air
conditioning
unit
cool air hose
(Ø 100 mm)
connecting flange
for cool air hose
air conditioning unit
cover over dust
filter screen
32 english
… 32 …


Need help? Post your question in this forum.

Forumrules
1

Forum

dr.-kern-prestige

Reset search

  • I have a 2005 dr kern prestige tan bed, looking for used facial glass & u.v. Filters & possibly complete asm including retaining brackets Submitted on 9-12-2021 at 05:33

    Reply Report abuse

  • I have a 2005 dr kern prestige tan bed , looking for facial glass or complete u.v. Glass & retainer Submitted on 9-12-2021 at 05:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Prestige in the language / languages: English, German as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info