499406

Dr. Kern Prestige Manual

31
Zoom out
Zoom in
Previous page
1/40
Next page
Installation of the air conditioning unit for
body air cooling
First, disassemble the base panel as described at the
beginning of the Installation Guide.
Finally, the body cooler is disassembled, because the
foot-end side housing plate of the system must be
replaced in order to retrofit the air conditioning unit.
Pull the plug for the electrical connection on the
underside of the bench.
Finally, remove the threaded fasteners (M8) and remove
the body cooler, by which the electrical connection is
pulled out through the opening in the side housing panel.
Optional equipment
If preferred, your system can be equipped with the
following components:
l Air conditioning unit for body cooling at the foot end
l Supplementary body cooler at the head end
This can be provided either at the factory before delivery
of the tanning system or also after start-up in the studio.
The retrofit is described as follows:
Finally the side cover is removed. To this end, unscrew
the threaded fasteners on the front side chassis
member (3 ea Ø 6.3) as well as to the rear base cover
(3 ea Ø 4.2).
Next, install the side cover with the integrated cool air
vent. To this end, use the threaded fasteners
(Ø 6.3 and Ø 4.2) provided.
Now the body cooler must be installed once again on
the side cover. Pull the connecting cable through the
opening in the side cover and fasten the body cooler
with the threaded fasteners (M8) and their
corresponding nuts on the inside of the cover. Plug the
electrical cable into the socket on the bench.
threaded fasteners (Ø 4,2)
threaded
fasteners (M8)
threaded
fasteners (Ø 6,3)
threaded
fasteners (Ø 4,2)
threaded
fasteners (M8)
integrated cool air
vent
31english
… 31 …


Need help? Post your question in this forum.

Forumrules
1

Forum

dr.-kern-prestige

Reset search

  • I have a 2005 dr kern prestige tan bed, looking for used facial glass & u.v. Filters & possibly complete asm including retaining brackets Submitted on 9-12-2021 at 05:33

    Reply Report abuse

  • I have a 2005 dr kern prestige tan bed , looking for facial glass or complete u.v. Glass & retainer Submitted on 9-12-2021 at 05:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Prestige in the language / languages: English, German as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info