499406
29
Zoom out
Zoom in
Previous page
1/40
Next page
After you have disassembled the foot-end body cooler,
remove the head and foot-end rear wall parts of the
base.
To this end, unscrew each of the threaded fasteners on
the side housing sections (1) as well as on the exhaust
unit (2) and remove.
For the removal of the exhaust unit, lift this up in a slightly
tipped position, so that the angle bracket slides out of
the groove in the rear bench chassis member (3).
Before you carry the bench to the final location of the
system in the cabin, you should disassemble the side
housing sections at the head and foot end.
To this end, unscrew the threaded fasteners (3 threaded
fasteners per side Ø 6.3) for the housing sections in the
front chassis member.
Now the complete bench with the attached feet can be
transported into the cabin easily.
The factory pre-assembled and adjusted tension sp-
ring system on the feet must not be disassembled.
When you have finished set-up of the system at its final
location, you must place the bench into the spring shaft
with assistance of the adjustable stops in the feet. This
is an absolute requirement for optimal assembly and
later operation of the system.
exhaust unit
pedestal cover, rear side, head end
pedestal
cover,
rear side,
foot end
screw Ø 4,2 x 9,5
screw Ø 4,2 x 9,5
1
2
side cover,
foot end
adjustable
stops in feet
threaded
fasteners
tension spring system
bench
side cover,
head end
29english
Cabin layout and dimensions are of great importance
for the scope of disassembly as well as for the final
sequence of reassembly. The time required for
reassembly can be accomplished more rapidly using
a different sequence contingent on specific conditions
relating to space. Generally the system is reassembled
in reverse sequence to that of disassembly.
29


Need help? Post your question in this forum.

Forumrules
1

Forum

dr.-kern-prestige

Reset search

  • I have a 2005 dr kern prestige tan bed, looking for used facial glass & u.v. Filters & possibly complete asm including retaining brackets Submitted on 9-12-2021 at 05:33

    Reply Report abuse
  • I have a 2005 dr kern prestige tan bed , looking for facial glass or complete u.v. Glass & retainer Submitted on 9-12-2021 at 05:18

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dr. Kern Prestige at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern Prestige in the language / languages: English, German as an attachment in your email.

The manual is 0,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info