Manual Dr. Kern excellent 24 7 (page 18 of 28) (English, German)

499398

Zoom out

Zoom in

1/28

english

Bench assembly for compact pedestal version

At the head sides of the bench, plastic side panels have

already been fitted in the factory using "furniture screws".

These side panels must now be removed to continue

with the assembly. Remove the screws using a large

screwdriver or a normal coin.

Fig. 12

Push the foot panel with the projecting flaps

between the rear wall and head strut

Head strut

Rear wall

Fig. 7

Front pedestal cover panel

Fig. 6



Shove it into the

grove until it snaps

Lightly press in here

Top edge of front

pedestal panel goes

into the groove

Secure the outer sides of the pedestal covers toward

the foot end. Again, make sure that the lightly grainy

surface on the panel is facing outward.

Take 3 ea. of the 4,2 mm x 9,5mm sheet metal screws

from the accessories bag and use them to secure the

panels.

Fig. 9

Fig. 8

Pedestal cover

Pedestal

cover

Front pedestal cover

panel

That is all you need to do, put the pedestal together. The

bench can now be situated onto the intended securing

points on the pedestal.

As prepration of mounting the canopy, loosen the top

securing screws on the side panels at both the right and

left sides. Use a big screwdriver to do this.

Fig. 10

Side cover

Top securing

screw

Mouthlike groove

Protection Plate

Securing screw to

Canopy Chassis

Fig. 11

After loosening the screws, pull the side panel out-

ward, then using a screwdriver, place it gently in the

gap to keep it ajar. See fig. 11.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dr. Kern excellent 24 7 in the language / languages: English, German as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dr. Kern excellent 24 7 Manual

Product: