571590

Dovre ZEN 102 Manual

35
Zoom out
Zoom in
Previous page
1/183
Next page
12. Threaded rod M8 (optional)
13. Finishing cover
Installation
General preparation
Please check the appliance immediately after deliv-
ery for damage during transport or any other dam-
age or defects. The appliance is attached to the
pallet with screws at the bottom.
If you detect transport damage or any other
damage or defects, do not use the appliance
and notify the supplier.
Remove the detachable parts from the appliance
before you begin its installation.
It is easier to move the appliance and to avoid
damage if the removable parts have been
removed.
Note the location of the removable parts, so
that you can re-position the parts in the correct
place later on.
Open door
Open the door by pulling the handle forward and
unlocking the door; see next figure.
09-20020-307
As the latch button becomes warm during use
of the appliance, a glove has been supplied
which you can use to protect your hand.
Remove fire-resistant inner plates
Vermiculite inner plates are light and tend to be
ochrous in colour on delivery. They insulate the
combustion chamber to boost combustion.
2
1
6
7 8
7
6
3
5
4
09-20020-308
Pos. Description
1 inner plate front left
2 inner plate left rear
3 inner plate at rear
4 inner plate front right
5 inner plate right rear
6 inner plate top
7 baffle plate
8 baffle plate holder
To remove the inner plates, follow the instructions
below; see previous figure.
1. First remove the inner plates on the side (1),(2),(4)
and (5) by lifting these up and out of the appliance
via the door opening.
2. Remove both inner plates (6).
3. Remove the inner plate (3).
4. Remove both baffle plates (7) from the baffle plate
holder (8).
5. Remove the baffle plate holder (8).
Remove stove base
The stove base is protected by fire-resistant inner
plates. Remove these inner plates first and then
remove the stove base from the appliance.
Subject to change because of technical improvements
9
… 35 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dovre ZEN 102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dovre ZEN 102 in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 18,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info