Manual Dovre ZEN 100 (page 42 of 183) (English, German, Dutch, French, Italian, Spanish, Norwegian)

571589

Zoom out

Zoom in

1/183

Maintenance

Follow the maintenance instructions in this chapter to

keep the appliance in good condition.

Flue

In many countries, you are required by law to have

your chimney checked and maintained.

At the start of the heating season: have the chim-

ney swept by a recognised chimney sweep.

During the heating season and after the chimney

has not been used for a long time: have the chim-

ney checked for soot.

At the end of the heating season: close off the chim-

ney and plug with newspaper.

Cleaning and other regularly

maintenance

Do not clean the appliance when it is still

warm.

Clean the exterior of the appliance with a dry lint-

free cloth.

You can clean the appliance interior thoroughly at the

end of the heating season:

If necessary, first remove the fire-resistant inner

plates. See the chapter "Installation" for instruc-

tions on removing and installing the inner plates.

If necessary, clean the air supply ducts.

Remove the baffle plate at the top of the appliance

and clean it.

Checking fire-resistant inner plates

The fire-resistant inner plates are consumables that

are subject to wear and tear. Vermiculite inner plates

are fragile. Do not knock the inner plates with logs.

Check the fire-resistant inner plates frequently and

replace them when necessary.

See the chapter "Installation" for instructions on

removing and installing the inner plates.

The insulating vermiculite or chamotte inner

plates may develop hairline cracks, but this

does not affect their performance adversely.

Cast-iron inner plates last a long time if you

remove frequently the ash that can accumulate

behind them. If accumulated ash behind the

cast-iron plate is not removed, the plate will no

longer be able to dissipate the heat to the sur-

roundings and this may cause the plate to warp

or crack.

Never use the appliance without the fire-res-

istant inner plates.

Cleaning the glass

Dirt clings less easily to well-cleaned glass. Proceed

as follows:

1. Remove dust and loose soot with a dry cloth.

2. Clean the glass with stove glass cleaner:

a. Apply stove glass cleaner to a kitchen sponge,

rub down the entire glass surface and give the

cleaning agent time to react.

b. Remove the dirt with a moist cloth or kitchen

tissue.

3. Clean the glass again with a normal glass cleaning

product.

4. Rub the glass clean with a dry cloth or kitchen tis-

sue.

Do not use abrasive or aggressive products to

clean the glass.

Wear household gloves to protect your hands.

If the glass in the appliance is broken or

cracked, it must be replaced before you can

use appliance again.

Ensure that no stove glass cleaner runs

between the glass and the cast-iron door.

Lubrication

Although cast-iron is slightly self-lubricating, you will

still need to lubricate moving parts frequently.

Lubricate the moving parts (such as guide sys-

tems,hinge pins, latches and air slides) with heat

resistant grease that is available in the specialist

trade.

Subject to change because of technical improvements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre ZEN 100 in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 18,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre ZEN 100 Manual

Product: