Manual Dovre ZEN 100 (page 37 of 183) (English, German, Dutch, French, Italian, Spanish, Norwegian)

571589

Zoom out

Zoom in

1/183

convection air) must be able to flow freely within the

space to be heated; see following figure.

09-20020-310

A Convection air current

B Radiated heat

C Air supply from the room to be heated

When building the hearth, follow these instruc-

tions for the convection space:

The top of the convection space must be closed air-

tight using a cover plate of non-flammable and

heat-resistant material.

The cover plate must be level and placed at least

30 cm below the flue opening in the ceiling.

Air inlet grates must be fitted at the bottom of the

hearth to allow for ambient air intake. The minimum

air inlet opening is 250 cm

. If the space is not suf-

ficiently ventilated, you must provide for outside air

to be allowed in by means of the outside air con-

nection kit or an optional adjustable damper.

Air outlet grates must be installed at the top of the

hearth just below the cover plate. The minimum air

outlet opening is 500 cm

The inlet and outlet grates are available as

options.

Do not use combustible material in the con-

vection space, and avoid the effect of thermal

bridging when using materials that conduct

heat.

Follow the instruction below when building the

hearth:

1. Build the base of the hearth and fit the air inlet

grates into the masonry.

You can place the air inlet grates on all sides of

the base.

Make sure the door of the appliance can swing

freely over the hearth floor.

2. Build the hearth up to the smoke dome.

Ensure that a clearance of 2 mm is maintained

between the built-in fireplace and the masonry

to accommodate the thermal expansion of the

fireplace.

3. The inside of the convection space may, if

desired, be cladded with reflective, insulating

material.

Additional cladding of the convection space pre-

vents unnecessary thermal radiation towards

outer walls and/or adjacent rooms. It also pre-

vents damage to the hearth wall insulation.

4. Build the rest of the hearth up to the flue opening

hole in the ceiling.

The masonry should not rest on the fireplace.

Use a support such as a steel beam. Leave a

clearance of at least 3 mm between the sup-

port and the appliance.

5. Close the convection space with the cover plate.

6. Put the air outlet grates under the cover plate.

Subject to change because of technical improvements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre ZEN 100 in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 18,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre ZEN 100 Manual

Product: