Manual Dovre TAI 45C (page 47 of 223) (English, German, Dutch, French, Italian, Spanish)

571252

Zoom out

Zoom in

1/223

Appliance features

The TAI M appliance can be used to burn wood,

coal (anthracite) and brown coal briquettes. The

appliance comes with a side filling door.

The TAI C appliance can be used to burn coal

(anthracite) for continuous use. The appliance is

equipped with a coal bunker as standard.

The appliance can be connected to the chimney at

the rear.

The appliance comes with a “cold hand” to manip-

ulate the riddling grate (TAI M), to open the filling lid

and to remove the ash pan.

The multi-fuel appliance (TAI M) is equipped with a

separate door for adding the fuel, the ‘side filling

door’.

The coal bunker can easily be removed via the

filling lid.

The TAI M appliance is equipped with a riddling

grate.

The TAI C appliance is equipped with a fixed burn-

ing grate.

The appliance has two access ports for ash

removal.

The appliance is equipped with an adjustable ther-

mostat.

The appliance is equipped with chamotte or refract-

ory stone interior cladding.

Installation

Preparation

Please check the appliance immediately after deliv-

ery for damage during transport or any other dam-

age or defects. The appliance is attached to the

pallet with screws at the bottom.

If you detect transport damage or any other

damage or defects, do not use the appliance

and notify the supplier.

Remove the removable parts (fire-resistant inner

plates, ash pan, grates, bunker and filling lid) from

the appliance before installing the appliance.

By removing removable parts, it is easier to

move the appliance and to avoid damage.

Note the location of the removable parts, so

that you can re-position the parts in the correct

place later on.

Chamotte inner plates are ochrous on delivery.

They insulate the combustion chamber to

improve the combustion, and they can with-

stand burning anthracite.

Preparing the connection to

the flue

You can connect the appliance to the chimney at the

rear.

Installing and connecting

1. Position the appliance in the correct place, and

make sure it is level.

2. Connect the appliance to the flue hermetically.

3. Re-position all removed parts in the correct places

in the appliance.

Never use the appliance without the fire-res-

istant inner plates.

If it is found that there is inadequate draw, the

recuperator plate at the back of the appliance

can be moved to reduce the dampening. See

next figure.

Subject to change because of technical improvements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre TAI 45C in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,71 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre TAI 45C Manual

Product: