Manual Dovre Sense 400 (page 62 of 291) (English, German, Dutch, French, Italian, Spanish, Norwegian)

571249

Zoom out

Zoom in

1/291

Check the appliance for air leaks. Close any

chinks with stove sealant.

Allow the sealant to harden fully before lighting

the appliance, as any moisture in the sealant

will form bubbles, resulting in a new air leak.

Adjust door closing

Check if the door closes properly. If required, the clos-

ing of the door can be set looser or tighter by adjusting

the distance between the locking cam and the door.

Proceed as follows:

1. Open the door. The locking cam (2) is now freely

accessible; see next figure.

2. Unscrew the two screws (1) with which the lock-

ing cam is attached.

3. By removing the packing plate (3) behind the lock-

ing cam (2), the door closes more tightly. If the

door closes too tightly then insert an additional

packing plate behind the locking cam.

4. Tighten the two screws and check the closing of

the door once again.

09-20021-024

123

Replacing the glass

If the glass in the appliance is broken or

cracked, it must be replaced before the stove

is used again.

In order to replace the side glass, all the inner panels

and the air guide must first be removed. The air guide

is attached with a M8 nut in the middle at the top of the

appliance. Proceed as follows:

1. Unscrew the two glass fixings with parts (1) and

(2) and remove the glass (3), see following figure.

2. Check the glass seal and, if necessary, fit a new

sealing rope.

3. Place the new glass in the grove and tighten the

glass fixings.

09-20021-025

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre Sense 400 in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 23,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre Sense 400 Manual

Product: