745853
75
Zoom out
Zoom in
Previous page
1/204
Next page
Appendix 5: Calculation sheet for checking
projected route
Follow the three steps below to check whether the desired route for the concentric chimney exhaust is permitted.
1. Sketch the desired route and use it as a basis for filling in the information required in the table below. You can
disregard the actual roof or wall sleeve here.
Description Abbreviation
Measured
value
Number of metres, vertical (1) metre
Number of metres horizontally 100mm/150mm (2) metre
Number of metres horizontally 130mm/200mm… x 0.5 metres (3) metre
Number of metres at an angle of 45° (4) metre
Number of elbows up to 4: x 0.5 metres per elbow (5) metre
Number of elbows up to 9: x 1.0 metres per elbow (6) metre
2. Use the data above to calculate the values in the following table:
Description Abbreviation Result
Total resistance length = (1)+(2)+(3)+(4)+(5)+(6) L metre
Total vertical length = (1) V metre
Total horizontal length = (2)+(3)+(5)+(6) H metre
Total vertical length minus Total horizontal length = V - H R metre
3. Use the table below to determine whether the desired route is permitted and what the position of the restric-
tion plate should be for the appliance to function optimally.
Subject to change because of technical improvements
35
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dovre Sense 203GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dovre Sense 203GA in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info