745853

Dovre Sense 203GA Manual

67
Zoom out
Zoom in
Previous page
1/204
Next page
Subject to change because of technical improvements
27
1
2
3
4
5
6
7
8
09-20020-244
1 Piezo ignition
2 On/off switch (option)
3 Eight-wire-receiver-contact
4 Microswitch
5 Piezo ignition connection (2.8x0.8mm)
6 Manual button in MAN position
7 Manual pilot regulator
8 Main valve button in OFF position
Access to the pilot is only required for igniting
with a match.
Do not exert excessive force when turning the
main valve button. The button has a slip-action
clutch that clicks until the final stops are
reached. This enables manual programming of
the flame height and the pilot standby position.
Read the safety information before continuing.
1. Turn the main valve button (8) to the OFF position,
completely clockwise .
2. Turn the MANUAL button (6) to the MAN position,
completely clockwise .
A manual pilot regulator and Piezo ignition
(option) are accessible when the MAN button
is in the MAN position.
3. Wait five minutes until the stove is free of gas.
Check by smell whether any gas is still present
around the stove, including near the floor.
If you detect any gas odour, stop immediately.
See the last warning in the chapter “Safety”. If
no gas is present, proceed to the next instruc-
tion step.
4. Press the manual pilot regulator (7) all the way in
and continue pressing to start the pilot gas flow.
Ignition with a match:
Ignite the pilot directly with a match while keeping
the manual pilot regulator pressed in for approx-
imately one minute after the pilot is ignited. Then
release the manual pilot valve regulator. If the pilot
goes out, wait for five minutes and repeat the
instruction above.
Piezo ignition:
Move the ignition cable from the receiver to the
valve; see the previous figure. Press the Piezo
ignition. If the pilot goes out, wait for five minutes
and repeat the instruction above.
If the pilot continues to go out after several
attempts, switch the gas regulator button (main
valve button) to OFF and proceed to step (8).
5. If applicable, put the pilot access panel back in
place before continuing.
6. Turn the MANUAL button to the ON position,
entirely counter-clockwise .
7. Turn the MANUAL button to the ON position,
entirely counter-clockwise
8. If the appliance does not work, follow the instruc-
tions under “Switch off gas to stove”.
Switch off gas to stove
If the gas regulator is accessible, turn the main valve
button to the OFF position, completely clockwise
.
If the stove will not be used for an extended
period, close the gas valve in the gas supply
pipe as well.
Combustion control
When the stove is still fairly cold, the flames of the
main burner are very blue during ignition. As the stove
heats up to operating temperature, the flames will
… 67 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dovre Sense 203GA at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dovre Sense 203GA in the language / languages: English, German, Dutch, French, Spanish as an attachment in your email.

The manual is 5,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info