Manual Dovre Sense 100 (page 40 of 180) (English, German, Dutch, French, Italian, Spanish)

571208

Zoom out

Zoom in

1/180

09-20021-015

Connecting to the rear

For a connection to the rear, the position of the con-

nection collar needs to be changed. The connection

collar is attached with 2 M8 nuts (key 13). Proceed as

follows:

1. First remove the baffle plate.

2. Unscrew the nuts and remove the connection col-

lar.

Check that the sealing tape on the contact sur-

face is not damaged. Replace the sealing tape

if it is damaged.

3. Place the connection collar turned 180° with

respect to its original position; see next figure.

09-20021-016

4. Fit the connection collar with the 2 M8 nuts.

5. Replace the baffle plate.

Preparing the outside air

connection

If the appliance is installed in a room without sufficient

ventilation, you can install the connecting kit on the

appliance for the supply of outside air.

The air supply tube is 100mm in diameter. If using a

smooth tube, it may be no longer than 12metres long.

If accessories such as bends are used, the maximum

length (12metres)) must be reduced by 1metre for

each accessory used.

Outside air connection via the wall

1. Make an opening in the wall (see the appendix,

"Measurements", for the correct position of the

opening).

2. Close the air connection hermetically to the wall.

Installing and connecting

1. Position the stove in the correct place, and make

sure it is level. The appliance is fitted with

adjustable feet so that it can be levelled.

Subject to change because of technical improvements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre Sense 100 in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 14,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre Sense 100 Manual

Product: