Manual Dovre Bow-P (page 36 of 161) (English, German, Dutch, French, Italian, Spanish, Norwegian)

695910

Zoom out

Zoom in

1/161

Subject to change because of technical improvements

Clean the exterior of the appliance with a dry lint-

free cloth.

You can clean the appliance interior thoroughly at the

end of the heating season:

If necessary, first remove the fire-resistant inner

plates. See the chapter "Installation" for instruc-

tions on removing and installing the inner plates.

If necessary, clean the air supply ducts.

Remove the baffle plate at the top of the appliance

and clean it.

Checking fire-resistant inner plates

The fire-resistant inner plates are consumables that

are subject to wear and tear. Inner plates are fragile.

Do not knock the inner plates with logs. Check the

fire-resistant inner plates frequently and replace them

when necessary.

See the chapter "Installation" for instructions on

removing and installing the inner plates.

The refractory inner plates may begin to show

hairline cracks, but this does not negatively

affect their functioning.

Never use the appliance without the fire- res-

istant inner plates.

Cleaning the glass

Dirt clings less easily to well-cleaned glass. Proceed

as follows:

1. Remove dust and loose soot with a dry cloth.

2. Clean the glass with stove glass cleaner:

a. Apply stove glass cleaner to a kitchen sponge,

rub down the entire glass surface and give the

cleaning agent time to react.

b. Remove the dirt with a moist cloth or kitchen

tissue.

3. Clean the glass again with a normal glass cleaning

product.

4. Rub the glass clean with a dry cloth or kitchen tis-

sue.

Do not use abrasive or aggressive products to

clean the glass.

Wear household gloves to protect your hands.

If the glass in the appliance is broken or

cracked, it must be replaced before the stove

is used again.

Ensure that no stove glass cleaner runs

between the glass and the cast-iron door.

Enamelled stove maintenance

Never clean the appliance while it is still hot. The

most effective way to clean the enamelled surface of

the stove is with a mild green soap and lukewarm

water. Use as little water as possible, rub the surface

dry and prevent the formation of rust. Wire wool or

other abrasives should never be used. Never place a

kettle directly onto an enamelled stove; use a stand to

prevent damage. Attention: Do not allow aggressive

acidic products to get onto enamelled components.

Lubrication

Although cast-iron is slightly self-lubricating, you will

still need to lubricate moving parts frequently.

Lubricate the moving parts (such as guide sys-

tems,hinge pins, latches and air slides) with heat-

resistant grease that is available in the specialist

trade.

Touching up damaged paint

Small areas of damaged paint finish can be touched

up with a spray can of special heat-resistant paint,

available from your supplier.

Touching up the enamelled surface

Enamelling is a process carried out by traditional meth-

ods, meaning that it is possible that small colour dif-

ferences and damage may occur. The appliances

undergo a visual inspection in the factory, that is to

say, the inspector looks at the surface for a period of

10 seconds from a distance of 1 metre.

Any damage that does not stand out is regarded as

OK. A special heat-resistant paint is supplied with the

appliance to touch up any minor damage caused dur-

ing transport.

Apply the heat-resistant paint in thin layers and leave

to dry well before using the appliance.

Some enamel colours are temperature-sensitive. It

can happen that the colour changes during use.

The original colour will return after the appliance

has cooled down.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre Bow-P in the language / languages: English, German, Dutch, French, Italian, Spanish, Norwegian as an attachment in your email.

The manual is 5,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre Bow-P Manual

Product: