Manual Dovre 640CB (page 29 of 136) (English, German, Dutch, French, Italian, Spanish)

571262

Zoom out

Zoom in

1/136

The appliance is fitted with an ash removal port

that can be opened.

The appliance is supplied with a scraper for

removing excess ash.

The appliance is suitable for an outside air

connection. The connection kit necessary for this

is sold separately.

Installation

Preparation

Please check the appliance for damage caused

during transport or any other damage or defects

immediately after delivery. The appliance is

attached to the pallet with screws at the bottom.

If you detect damage caused during transport

or any other damage or defects, do not use the

appliance and notify the supplier.

Remove the removable parts (top plate, fire-

resistant inner plates, ash pan) from the appliance

before you start installing the appliance. Removing

the top plate makes it easier to connect the

appliance.

The top plate is loose on the appliance and can

simply be lifted off the appliance.

By removing removable parts, it is easier to

move the appliance and to avoid damage.

Note the location of those removable parts, so

that you have no difficulties in installing the

parts in the right place later on.

1. Open the door.

2. Remove the fire-resistant inner plates.

Cast iron inner plates protect the combustion

chamber and dissipate heat to the

environment.

Connecting to the rear or upper

side

When connecting the appliance to a chimney, you can

choose the top or rear of the appliance.

Plug the outlet that you don't want to use with the

corresponding cover that was supplied.

Install the corresponding connection collar that

was supplied on the outlet that you want to use.

Sealant and materials are supplied.

1. Fit the connection collar (1) to the outlet fitted to

the chimney using the fixing materials.

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 640CB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 9,94 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 640CB Manual

Product: