Manual Dovre 425CB (page 32 of 144) (English, German, Dutch, French, Italian, Spanish)

571258

Zoom out

Zoom in

1/144

Fitting the handle and handle

holder (model 550CB)

The appliance is supplied with a loose handle, the so-

called "cold hand".

1. Fit the wooden handle to the adaptor using screw

M8x50 provided; see following figure.

09-20015.088

2. Fit the handle holder (A) supplied to the bottom

plate using the nut and bolt M8; see the following

figure.

Preparing the connection to

chimney

When connecting the appliance to the chimney you

have the choice of connecting via either the upper side

or the rear. See the paragraphs "Connecting on the

upper side" and "Connecting at the rear".

Model 550CB also has the option of connecting at the

side. See the instructions in the paragraph

"Connecting on the side (model 550CB)".

The appliance is not supplied with a flue gas

opening at the rear or on the upper side. However,

model 550CB has two flue gas openings on its

sides (one on the left and one on the right). If you

do not use one or both of the side connections,

cover the side connections(s) that you are not

using with the cover supplied.

Model 550CB is supplied with two covers that have

the Dovre logo on them.

Sealant and materials supplied.

When connecting to the upper side an opening has

to be made in the heat shield. At the spot when the

opening has to be made an incision has been made

in the heat shield.

Preparation for connection at the

rear side

Make the necessary opening in the heat shield.

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 425CB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 8,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 425CB Manual

Product: