571297
29
Zoom out
Zoom in
Previous page
1/88
Next page
3. Mount the ash drawer under the bottom plate
below the door using the M8x12 screws
4. Set the appliance upright on the mounted legs.
Support the appliance when placing it upright
so that not all the weight is not on the legs.
Mounting the handle and
operating
knob
Secure the handle using the M6x20 screw supplied(2)
to the front piece and the operating knob for the air
regulator (1); see following figure.
1
2
09-20020-166
Preparing the connection to
the flue
When connecting the appliance to the chimney you
have the choice of connecting via either the side, the
rear or the upper side. See the paragraph ‘Connecting
to the side, upper side or rear’. It is also possible to
make a connection using the 400-200 attachment that
can be ordered separately; see the paragraph ‘Con-
necting using attachments’.
The appliance is not supplied with a flue gas ope-
ning.
Sealant and materials supplied.
Connecting to the side, upper side
or the rear
First of all, choose whether to connect the appliance
to the flue from the the side, upper side or the rear.
1. Mount the sealing collar (300-8) on the flue ope-
ning with the two screws and M8 nuts; see fol-
lowing figure.
2. Apply sufficient sealant to the seal (300-7).
3. Close off the other connection options with the
sealing covers and clamping plates supplied using
M6 screws.
4. Use enough sealant
 
0
0
09-20020-167
Connecting using attachments
The 400 and 200 attachments increase the heat
exchange area of the stove thereby making it more effi-
cient. By using the optional attachments (sold sepa-
rately), you can make side and upper connections.
1. Remove the covers on the upper side of the stove.
2. Place the attachment onto the opening.
3. Use the supplied stove sealant for sealing the
attachment and the appliance.
4. Follow the instructions given in the paragraph ‘Con-
necting to the side, upper side or rear section to
create the flue opening and to mount the collar con-
nection supplied.
Subject to change because of technicalimprovements
7
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dovre 342CB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 342CB in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info