571614

Dovre 2520S2R Manual

56
Zoom out
Zoom in
Previous page
1/253
Next page
09-20020-182
Changing the opening direction of
the door
If desired, the opening direction of the door can be
changed. The appliance is supplied with a door open-
ing to the right. Follow the instructions below.
1. Unscrew the door latch.
2. Unscrew the locking cam from the post.
3. Pull the hinge pins out of the hinges.
Be sure to support the door sufficiently; without
the hinge pins, the door can come loose unex-
pectedly.
4. Remove the door from the appliance.
5. Remove the washers from the hinge lobe and
place them on the other side of the appliance.
6. Position the door above the hinge lobes and insert
the hinge pins into the hinges.
7. Screw the latch onto the other side of the door.
8. Screw the locking cam onto the other side of the
door.
Comment: See the "Maintenance" chapter for adjust-
ing the closing of the door.
Connecting the fan to the mains
The fireplace insert is supplied with two built-in fans
and with a separate revolution control unit. The appli-
ance is also fitted with a thermo switch that turns the
fan on and off at a set temperature.
These parts must be connected to the mains as
shown in one of the connection diagrams below.
The connection diagram is specific to the
model.
Have the connection made by a qualified
installer.
The fireplace insert is provided with a three-
core cable.
The fireplace insert must be isolated from the
mains by a 2-pole switch.
Ensure that the fireplace insert is properly
earthed.
See Appendix 2 for extended connection diagrams.
Building into an existing
hearth
To build the stove into an existing hearth, follow the
steps below:
1. Place the appliance at the right height and level it.
Keep the electrical cable of the appliance free.
2. If you are going to put an external casing around
the appliance, you should fit the clamping plates
supplied to the sides of the appliance without fully
tightening the screws. This is because the outside
casing fits between the appliance and the clamp-
ing plates; see next figure.
12
Subject to change because of technical improvements
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Dovre 2520S2R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2520S2R in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 21,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info