Manual Dovre 250CBN (page 21 of 40) (English, German, Dutch, French)

571274

Zoom out

Zoom in

1/40

25OCB-250CBS 21 03.27630.000

3. Installation guideline

3.1. Preparatory measures

The stove should be hermetically connected to a well-functioning chimney, suffi-

ciently enclosed to keep combustible materials (floor and walls) at a distance, and

should be installed in a room with sufficient ventilation.

Please inform about national or local norms and regulations concerning this subject.

Your distributor will give you the necessary advice.

You can also consult the fire department and/or an insurance company about specif-

ic demands or regulations.

Please read the technical specifications under cover in this manual before installing

the stove.

3.1.1. The chimney

The chimney (the flue) has a double function:

 It draws air, that is necessary for good combustion, into the stove.

 It functions as an exhaust pipe for combustion gases via thermal or natural

draught. Thermal draught is caused by the difference in heat between the air in-

and outside the flue. The heated air in the flue is lighter than the colder air out-

side the flue and consequently rises up, along with the combustion gases. Natu-

ral draught is caused by environmental phenomena, such as wind.

It is prohibited to connect several heaters to one chimney (for instance the central

heating boiler), unless local or national regulations allow this.

Please check which chimney is to be used for the stove you purchased and whether

your chimney is appropriate for this specific usage. You should consider an expert's

opinion on this matter.

The chimney should meet the following conditions:

 The flue should be made of fireproof material. Ceramic or stainless steel is re-

commended.

 The chimney should be airtight and thoroughly cleaned and should guarantee a

sufficient draught (a draught or negative pressure of 15 to 20 Pa is ideal under

normal circumstances).

 It should run as vertically as possible. Changes in direction or horizontal seg-

ments will disrupt the smoke flow and may cause soot to cumulate inside the

flue (and clog the flue!).

 The chimney's inside dimensions must not be too large in order to prevent the

smoke from cooling off too much. For recommended chimney dimensions, see

the technical specification under cover. Larger dimensions can be used if the flue

is well insulated.

 The flue's diameter should be the same throughout its whole length. Wider, or

especially narrower segments will disrupt the smoke flow and are best avoided.

The same is true for a cover plate or exhaust hood on top of the chimney. The

exhaust hood must not narrow the chimney's outlet and should be designed in a

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 250CBN in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 2,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 250CBN Manual

Product: