Manual Dovre 2180CBC (page 46 of 182) (English, German, Dutch, French, Italian, Spanish)

571319

Zoom out

Zoom in

1/182

The primary air slide controls the air flow under the

grille (1).

The secondary air slide controls the air flow in front of

the glass (air-wash) (2).

The back wall has permanent vents (3) below the

baffle plate that allow for post-combustion.

Advice

Regularly burn wood with intense roaring fires.

If you frequently have low intensity fires, tar

and creosote may be deposited in the chimney

. Tar and creosote are highly combustible

substances. Thicker layers of these

substances might catch fire when the

temperature in the chimney increases

suddenly and steeply. Therefore it is

necessary for the fire to regularly burn very

intensely, so that layers of tar and creosote

disappear.

Low intensity fires also cause tar deposits on

the stove window and door.

When the outside temperature is not very low,

it is better to burn wood intensely for a few

hours instead of having a low intensity fire for a

long period of time.

Control the air supply with the secondary air inlet.

The secondary air inlet not only supplies air to

the fire but to the glass as well, so that it does

not get dirty so quickly.

Open the primary air inlet for the time being if the air

supply by the secondary air inlet is inadequate or if

you want to fan the fire.

It is better to add a small amount of logs regularly

than to add many logs at the same time.

Extinguishing the fire

Do not add fuel and just let the fire go out. If a fire is

damped down by reducing the supply of air, harmful

substances will be produced and released. Therefore,

let the fire go out naturally. Keep an eye on the fire

until it has gone out. When the fire has died

completely, all air inlets can be closed.

Removing ashes

After the wood has been burnt, a relatively small

amount of ashes is left over. This bed of ashes is a

good insulating layer for the bottom of the fire

compartment and improves combustion. Therefore,

you can leave a thin layer of ashes on the bottom of

the fire compartment.

However, the air supply through the bottom of the fire

compartment must not be impeded and no ash should

be allowed to accumulate behind a cast iron inner

plate. Therefore, remove any excess ash frequently.

1. Open the door of the appliance.

2. Open the ash removal port (C); see next figure.

3. Scrape the excess ash into the ashpan (A) using

the scraper provided.

4. Using the cold hand (B) supplied, remove and

empty the ashpan.

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2180CBC in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 30,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2180CBC Manual

Product: