Manual Dovre 2180CBBS (page 41 of 182) (English, German, Dutch, French, Italian, Spanish)

571321

Zoom out

Zoom in

1/182

Fitting the outside air intake

duct

If the appliance is installed in a room without sufficient

ventilation, you can install the connecting kit on the

appliance for the supply of outside air.

The air supply tube has a diameter of 100 mm. If

installing a smooth tube, it may be no longer than 12

m. If accessories such as bends are used, the

maximum length (12 m) must be reduced by 1 m for

each accessory used.

Outside air intake duct through the

wall or the floor and the connection

collar

1. Make a hole in the wall or the floor (refer to

Appendix 2, "Dimensions" for a suitable position

of the hole).

2. Fit the air intake duct airtight to the wall.

3. Fit the connection collar (A) to the M6 stud (B)

using the nut (D) and the lock washer (C); see

next figure.

Building into a new hearth

The stove is installed in two stages:

Placing and connecting the stove

Building up the hearth around the stove.

Placing and connecting the stove

1. Put the appliance at the right height and level it.

2. Check that there is a clearance of 100 mm

between the existing walls, which must have the

necessary insulation (see chapter "Installation

Conditions"), and the back of the appliance; see

the next two figures.

Subject to change because of technicalimprovements

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2180CBBS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 30,24 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2180CBBS Manual

Product: