Manual Dovre 2100S (page 34 of 60) (English, German, Dutch, French)

571305

Zoom out

Zoom in

1/60

2100 34 03.27855.100

3.2. Preparation

Please inspect the fireplace for damage caused during transport immediately after

delivery and notify your distributor in case there are any defects. Do not put the

appliance into operation in the meantime.

In order to avoid damaging the fireplace during installation and to make its handling

easier, it is recommended to remove previously all loose parts (fire-resistant bricks,

grille, ashtray, ...) from the stove. Note the location of those parts while removing

them, so that you have no difficulties in re-assembling the parts later on.

The stove will be supplied with the following parts:

 A flue collar with fixing material

 A “cold handle” to open the door

 A “cold handle” to remove the ashtray

3.2.1. Assembly of the flue Collar

Fix the flue collar on the smoke dome with bolts,

nuts and collars. Assure proper sealing with kit or

paste.

3.1.4. Combustible material round the fireplace

Within the radiation area of the fireplace

Assure a distance of at least 80 cm between the opening of the fireplace and com-

bustible material. That distance may be reduced to 40 cm if the combustible materi-

al is sufficiently shielded and well ventilated.

Outside the radiation area of the fireplace

Assure a distance of at least 5 cm between the mantle built

around the fireplace and combustible material. A small

surface contact between combustible material and the man-

tle (e.g. wall cladding) is allowed if the mantle of the fire-

place is sufficiently insulated.

A wooden ornamental rafter must not be installed within

the radiation area of the fire. Outside the radiation area,

there must always be a ventilation gap of 1 cm all around to

prevent heat from building up (see picture).

No combustible material must be present within 50 cm from the convection outlet

areas.

min 1 cm

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2100S in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2100S Manual

Product: