Manual Dovre 2100-serie (page 32 of 60) (English, German, Dutch, French)

571304

Zoom out

Zoom in

1/60

2100 32 03.27855.100

The same is true for a cover plate or exhaust hood on top of the chimney. The

exhaust hood must not narrow the chimney's outlet and should be designed in a

way that wind will not hinder, but promote the smoke flow.

 Especially if the flue runs through unheated rooms or outside the house, further

insulation is necessary. Metal chimneys, or parts of the chimney outside heated

rooms should always have double-walled, insulated flues. The part of the chim-

ney outside the roof should always be insulated.

 The chimney should be high enough (at least four metres) and should end in a

zone that is clear of nearby buildings, trees or other obstacles. The rule of

thumb here is: 60 cm above the ridge of the roof. If the distance between the

ridge and the chimney measures more than three metres, see the dimensions

stipulated in the illustration below. Depending on the presence of nearby build-

ings or trees, the chimney should be higher.

3.1.2. Ventilation

The burning of wood, charcoal or gas involves oxygen consumption. It is of the ut-

most importance that the room in which the stove is installed should be sufficiently

ventilated.

Insufficient ventilation may disrupt the combustion process and cause the smoke

flow through the chimney to be interrupted, which may lead to smoke emissions

into the room. Mainly in case of a fireplace, together with the combustion gases, lots

of room air will be extracted through the chimney; that makes supply of sufficient

fresh air and ventilation extremely important.

If necessary, you can install a ventilation grille to provide a constant flow of fresh air

in the room. This precaution is particularly necessary in well-insulated rooms with

mechanical ventilation.

The DOVRE fireplace has been designed to produce most heat by means of convec-

tion. Heat is mainly transmitted through the back panel, the lateral panels, and the

smoke dome. Both the material (cast iron) and shape (increased heating surface by

means of corrugation) improve heat transmission to the surrounding air. As this air

is heated, it will rise and a natural hot air flow, i.e. convection, will develop. Up to

your choice, that hot air may be led to the same room or to another room.

For optimal heating and leading the convection air, the airflow must not encounter

any obstacles. Hence, it is important that there is enough space between the fire-

place and the surrounding material, and that the inlet and outlet area of convection

air are sufficiently large.

min 1 m

highest point of the roof

within a distance of 3 m.

3 m

min 0.5 m

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Dovre 2100-serie in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Dovre 2100-serie Manual

Product: