553353
83
Zoom out
Zoom in
Previous page
1/92
Next page
Additional routines
10.2010 Gallery 310 79
Energy saving periods
In order to save electric power when the machine is not in use, this
function is used to lower the water temperature in the boiler and to
switch off the door light.
The energy saving function is enabled / disabled in ‘Set state’.
7 energy saving periods can be programmed on a weekly basis.
For each period a start day and time, and an end day and time must
be defined. The start and end days are identified by progressive
numbers: (Monday=0, Tuesday=1, etc.) and all weekdays (ALL=7).
This means:
An energy saving period that crosses midnight requires two period
settings, see Example, periods 1 and 2.
If the periods are set overlapping, the machine will be shut down
as long as it is covered by one of these periods, see. Example:
Period 3.xThe same time period cannot include days from
different weeks, i.e. a period cannot be set from Monday to
Monday.
A period cannot have a ‘start time’ later than the ‘end time’, see
Non Example 2.
Non Examples 1 and 2 illustrate settings which will give
unintended results.
The temperature during the energy saving period is set in ‘set
temperature’
Example
The vending machine is to run Monday to Friday from 07:00 till
22:00. The remaining time of the week and during the weekend the
machine is set to energy saving. Three periods have to be set as
follows:
Non Example 1:
Non Example 2:
Period 1
Set start day ALL=7 Set start time 22:00
Set end day ALL=7 set end time 23:59
Result: The machine is ‘shut down’ every day from 22:00 till midnight the same
day.
Period 2
Set start day ALL=7 Set start time 00:00
Set end day ALL=7 set end time 07:00
Result: The machine is ‘shut down’ from midnight 00:00 till 07:00 in the morning
the same day.
Period 3
Set start day Fr=4 Set start time 22:00
Set end day Su=6 set end time 23:59
Result: The machine is shut down from Friday evening at 22:00 till Sunday
evening at 23:59.
Period 1
Set start day Mo=0 Set start time 22:00
Set end day Fr=4 set end time 07:00
Result: The machine is ‘shut down’ Monday at 22:00 till Friday at 07:00 which
was not the intention.
Period 1
Set start day All=7 Set start time 22:00
Set end day All=7 set end time 07:00
Result: The machine is not ‘shut down’ as the end time must not be earlier than
the start time for the same day or the setting ‘ALL’.
83


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Douwe Egberts Gallery 310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Douwe Egberts Gallery 310 in the language / languages: English as an attachment in your email.

The manual is 5,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Douwe Egberts Gallery 310

Douwe Egberts Gallery 310 Additional guide - Dutch - 2 pages

Douwe Egberts Gallery 310 User Manual - Dutch - 92 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info