762107
6
Zoom out
Zoom in
Previous page
1/16
Next page
3
English
Expanded system (+1)
The call number for internal calls will be shown in
the display in standby mode. The base unit should be
positioned centrally so that the coverage area is roughly
equal for all handsets.
Intercom / internal call
1. Press (right menu button).
2. If using more than 2 handsets: Enter call number 1-6
for the desired handset or press 9 for all.
A tone will be heard if an external call comes in while an
internal call is in progress. End the internal call with L
and then answer the external call with q.
Transferring calls/Conference between handsets
When an external call is connected;
1. Press . Scroll to INTERCOM. Press OK.
2. If using more than 2 handsets: Enter call number 1-6
for the desired handset or press 9 for all.
3. To transfer: press L, For conference: hold *
pressed down.
Register a new handset
All handsets included in the package are already registered
to the base unit.
Only for separate handsets/service measures.
You can register up to 6 handsets to one base unit.
This model is GAP (Generic Access Prole) compatible,
which means that the handset and the base unit can both be
used with most other GAP compatible units irrespective of
manufacturer. However the GAP protocol cannot guarantee
that all functions may be accessed. Extra handsets will not be
available as accessories.
1. Hold down J on the base unit until indicator ashes.
2. Press . Scroll to REGISTRATION. Press OK.
3. Enter the base units PIN code (e.g. 0000). Press OK.
4. If the registration is successful the unit will return to
standby mode within one minute.
Answer machine (only NeoBio 15r/25r)
When the answer machine is switched on calls are answered
after a set number of rings, your outgoing message is heard
and the caller can leave a message. Total memory capacity
is up to 15 minutes depending on the set sound quality
(NeoBio 15r), or 30 min (NeoBio 25r). Most functions can
be accessed from both base unit and handset.
Switching the answer machine on/off
Press 1 (on the base unit) to switch the answer machine
off/on. If the base unit’s display is ashing/showing
-- the answer machine is disconnected, or time/date is
not set.
Off/On from the handset
1. Press . Scroll to ANS. MACHINE. Press OK.
2. Scroll to TAM OFF/ON. Press OK.
3. Scroll to desired setting. Press OK.
If the handset’s display shows with a steady light the
answer machine is switched on. If there are new messages,
the indicator will ash whether the answer machine is off
or on.
Outgoing message
The outgoing message (max 3 min) is heard by incoming
calls. There are two separate outgoing messages, one for
Answer only (callers cannot leave a message) and one for
normal answering function.
1. Press . Scroll to ANS. MACHINE. Press OK.
2. Scroll to TAM SETTINGS. Press OK.
3. Scroll to OGM SETTINGS. Press OK.
4. Scroll to ANSWER & REC/ANSWER ONLY. Press OK.
5. Scroll to RECORD MESS. Press OK.
6. After the long beep you can record your message
(speaking approx. 20 cm from the keypad). Press OK.
7. The message will be played back to you. Repeat the
above to change.
Also select desired answer function. See TAM Settings.
Screening
Incoming messages will be heard on the loudspeaker of
the base unit as they are received. If nothing can be heard,
check that the volume is turned up and that the function
has been activated – see separate description. You can also
press OK on the handset while recording is in progress.
The call can be intercepted by pressing q or lifting the
receiver of another telephone connected to the same line.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro NeoBio 15r at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro NeoBio 15r in the language / languages: English, French as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro NeoBio 15r

Doro NeoBio 15r User Manual - German, Dutch, Italian, Polish, Portuguese, Turkish, Spanish - 80 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info