300945
41
Zoom out
Zoom in
Previous page
1/88
Next page
5
English
Settings
Connection
1. Connect the telephone cord to a network wall socket and
to the
T
socket on the back of the telephone.
2. Connect the mains adapter to the mains power socket
and to the
Y
socket on the back of the telephone.
3. Connect the curly cord to the handset and to the
q
socket on the base of the telephone. (You will hear a click
when the modular plug is correctly in place).
4. Set the correct Flash time to 100 (see technical information
on page 7).
5. Lift the handset and listen for the dial tone.
Date/Time
1. Press down until
H
is shown.
2. Enter date (DD/MM).
3. Entertimeofday(HH:MM).
Press to cancel and return to standby mode.
Batteries
Four 1.5V type AAA batteries are needed so that caller ID,
memory etc will continue to function in the event of a power
cut. When the batteries have almost expired the
7
symbol will light up. Only use high quality batteries.
1. Check that the adapter is correctly inserted to avoid
losing saved information.
2. Unplug the telephone cable and remove the cover on the
base of the telephone.
3. Insert the batteries according to the markings for plus
and minus terminals.
4. Replace the battery cover and reconnect the telephone
cord.
41


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro hearplus 317c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro hearplus 317c in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info