Manual Doro HandleEasy 321rc (page 4 of 40) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

515796

Zoom out

Zoom in

1/40

English

HandleEasy 321rc is an easy-to-use remote control featuring

large buttons.

Batteries

HandleEasy uses three 1,5V AAA batteries. When the batteries are

running low, the indicator will flash three times when pressing a

button. Only use high quality batteries. Insert the batteries according to

the markings for plus and minus terminals under the cover at the back.

Programming buttons

In order for HandleEasy to work together with your equipment, it

must be ‘taught’ the signals that are sent from the remote control of

the equipment. HandleEasy can also be taught the signal of other

remote controls from different equipment i.e. channel browsing

from the TV and audio volume from the stereo.

1. Keep the ON and OFF buttons depressed for about 3

seconds. The indicator will show a steady light (if no button

is depressed within 10 seconds, the learning mode will be

cancelled).

2. Press the desired button on HandleEasy. The indicator will

ash once.

3. From a distance of approx. 1 in. to 4 in., point the remote

control of the equipment towards HandleEasy (so that the

signal points of both remote controls are facing each other)

and press the corresponding button. If HandleEasy was

successful in learning the signal, the indicator will ash

twice. If there is an error, the indicator will ash six times. If

necessary hold down the button of the equipment for up to

10 seconds to succeed with the learning.

4. After pairing wait for 10 seconds before testing the

programmed button or hold down the ON and OFF buttons

until the indicator goes out.

Repeat steps 2 and 3 for each button, or if the learning fails.

Repeat steps 1 and 3 if a button needs to be altered.

Programming, button with double signal

Certain remote controls send different signals every other

time a button is pressed, a double signal. If you experience that

HandleEasy only works now and then or jumps double steps

it is likely that the original remote control utilizes a double

signal. To teach HandleEasy this double signal, follow the

instructions below.

1. Keep both ON and OFF depressed for about 3 seconds. The

indicator will show a steady light (if no button is depressed

within 10 seconds, the learning mode will be cancelled).

2. Press the desired button on HandleEasy. The indicator will

ash once.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Doro HandleEasy 321rc in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,69 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Doro HandleEasy 321rc Manual

Product: