English
30 www.doro.com
Answering Machine (DECT 360)
Remote Control Commands
Button Function
1.......................................... Playback of incoming messages
2.......................................... Playback of the outgoing message
3.......................................... Erase current message
4.......................................... Repeat/skip to previous message
5.......................................... Stop, wait for new command
6.......................................... Skip to next message
7.......................................... Not used
8.......................................... Not used
9.......................................... Terminate remote control
0.......................................... Record a new outgoing message
* .......................................... Turn the answering machine off or on
#.......................................... Turn the day/time stamp function off or on
Remote Activation of the Answering Machine
If you have forgotten to turn the machine on, you can do so by remote access.
1. Ring the answering machine. It will answer after 12 rings with a long tone.
2. Enter the remote code after the beep that follows the outgoing message. If
the code is accepted, you will hear two short beeps.
3. Enter * and hang up.
Out of Memory
The total capacity of the answering machine’s memory is approximately 15
minutes including outgoing and incoming messages. If the memory is full, no
new messages will be accepted until the existing messages have been played and
erased. The symbol .. on the display of the base unit indicates that memory
is full.
When memory is full the machine will answer after 12 rings to allow remote
playback and deletion of messages.
