Manual Doro Congress Programmer (page 5 of 36) (English, Danish, French, Polish, Swedish, Norwegian, Finnish)

762105

Zoom out

Zoom in

1/36

EN 2

English

To delete a memory

1. Press v/V to select the required memory location.

2. Press DELETE.

3. DELETE? will be displayed.

4. Press DELETE to erase the selected memory position.

5. Press PROGRAM to exit.

To delete all memories press v/V then press and hold DELETE until DELETE ALL?

is displayed. Press DELETE again to delete all memories.

Transfer to telephone (Congress 150)

1. Disconnect the telephone line cord from the network wall socket.

2. Connect the supplied cable to the programmers UP LOAD socket and to the

socket marked PROG on the telephone.

3. Ensure the P/N/PROG switch is set to PROG.

4. CONNECTED will be displayed.

5. Press UPLOAD to transfer stored numbers to the telephone.

6. UPLOADING will be displayed followed by either OK if successful or ERROR!.

7. Disconnect the supplied cable and reset the P/N/PROG switch from PROG to N.

Repeat steps 1-7 on all telephones requiring programming.

Pulse/Tone dialling

If you have selected pulse dialling and you wish to switch to tone dialling during the

dialling sequence press */PT.

Programming equipment

A telephone can be connected to the UP LOAD socket for easy programming of One-

Touch-Memories.

The P/N/PROG switch on the underside of the telephone (Congress 150) must be set to

PROG.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Doro Congress Programmer in the language / languages: English, Danish, French, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 1,09 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Doro Congress Programmer Manual

Product: