300897
4
Zoom out
Zoom in
Previous page
1/40
Next page
English
1
Caution
The earpiece of the handset may attract small ferromagnetic objects such as staples
and pins, care should be taken when placing the handset near these items.
This device is intended for the analogue telephone network lines in AT, BE, BG, CH,
CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LV, LT, LU, MT, NL,
NO, PL, PT, RO, SI, SK, SE.
The mains adapter is the disconnect device between the product and mains power.
The mains socket outlet must be close to the equipment and easily accessible.
Batteries
The telephone requires 3 x AAA 1.5V alkaline batteries. When the batteries are
running low will be displayed.
The batteries will maintain the telephones functions for a few days and prevent the
loss of Caller ID, memories and other functions in the event of a power failure.
1. Check that the mains adapter is correctly connected to avoid losing stored
information.
2. Disconnect the telephone line cord from the network wall socket.
3. Remove the battery cover by pressing a small screwdriver (up to Ø 2.5mm) or
similar into the hole to the side of the battery cover.
4. Install the batteries ensuring that the correct battery polarity is observed.
5. Replace the battery cover.
Connection/Initial programming
1. Connect the curly cord to the handset and to the socket marked
q
on the
underside of the telephone.
2. Place the handset into the cradle.
3. Connect the mains adapter to the DC 9V socket on the underside of the
underside of he telephone, and an electrical wall socket.
4. The display will now ash the alarm setting.
5. If the alarm is not shown press and hold
v
until the alarm setting ashes.
6. Press
0
.
7. Select the required language using
v
/
V
. Press
0
.
8. Select the desired contrast setting (3=normal) using
v
/
V
. Press
0
.
9. Set the correct hour (00-23) using
v
/
V
. Press
0
.
10. Set the correct minute/s using
v
/
V
. Press
0
.
11. Set the correct day using
v
/
V
. Press
0
.
12. Set the correct month using
v
/
V
. Press
0
.
13. Select the required pause setting (2 seconds=normal) using
v
/
V
. Press
0
.
14. Please refer to Batteries above regarding the installation of back up batteries.
15. Connect the telephone line cord to the socket marked
T
on the telephone, and
to a telephone network wall socket.
16. Lift the handset and listen for the dial tone. Your telephone is now operational.
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro congress 205 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro congress 205 in the language / languages: German, French, Italian as an attachment in your email.

The manual is 1,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro congress 205

Doro congress 205 User Manual - English - 2 pages

Doro congress 205 User Manual - Dutch, Polish, Spanish - 68 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info