762027
13
Zoom out
Zoom in
Previous page
1/18
Next page
English
Note! A pre-recorded message is used until you make your own recording, and that message can
also be restored if required. To restore this, press Cduring playback of outgoing message.
Personal message (MEMO)
1. Press or =/O. Select ANS. MACHINE. Press OK or =/O.
2. Select MEMO. Press OK or =/O.
3. After the long beep you can record your message (speak 20 cm from the handset).
4. Press OK or =/O. The message will be played back to you.
5. Memos are played back in the same way as ordinary incoming messages.
Screening
Incoming messages will be heard on the loudspeaker of the base station as they are received. If
nothing can be heard, check that the volume is turned up and that the function has been acti-
vated, see Setup from DECT handset, p.8. You can also press OK on the DECT handset while re-
cording is in progress. The call can be intercepted by pressing qor lifting the receiver of
another phone connected to the same line.
Out of memory
The memory has room for up to 59 messages (including the outgoing message) max. 15 minutes
depending on the compression you set. When TAM FULL is displayed, no new messages can be
recorded until the old ones have been played back and deleted. In that case, the answering ma-
chine responds with the outgoing message for Answer Only.
Note! Remember to delete messages regularly!
Remote access
The answering machine can be remotely accessed using an ordinary tone dial phone.
1. Call the answering machine (the number that your answering machine is connected to, usu-
ally your home number).
2. Press *when the outgoing message is played.
3. Enter PIN code (default code is 0000), see Setup from DECT handset, p.8.
4. Select remote access command(s):
2Delete current message
4Press once to repeat current message. Press twice to skip to previous
message.
5Playback of messages.
6Skip forward
7Turn the answering machine ON
8Stop
9Turn the answering machine OFF
Note! Using a PIN code prevents other people from accessing your machine without permission.
For security reasons, it is recommended that you change the PIN code from the default setting of
0000, see Base station settings (SETTINGS or BS SETTINGS), p.6.
10
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro Comfort 4005 V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro Comfort 4005 V2 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro Comfort 4005 V2

Doro Comfort 4005 V2 User Manual - German - 18 pages

Doro Comfort 4005 V2 User Manual - Dutch - 18 pages

Doro Comfort 4005 V2 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info