762027
10
Zoom out
Zoom in
Previous page
1/18
Next page
English
KEY TONE Key tone ON or OFF
DELETE HS To de-register a DECT handset.
FLASH TIME Recall time.
LONG =New Zeeland.
MEDIUM =France/Portugal.
SHORT =others including UK/AUS.
BS DEFAULT Resets all base station settings to default.
CHANGE PIN The code (default 0000) can be changed.
Note! A de-registered DECT handset can no longer be used with the system!
Expanded system (two or more DECT handsets)
The call number for internal calls will be displayed in standby. The base station should be posi-
tioned centrally so that the coverage area is roughly equal for all DECT handsets.
Register a new DECT handset
All DECT handsets included in the package are already registered to the base station. You can
register up to 5 handsets to one base station.
Note! This model is GAP (Generic Access Profile) compatible, which means that the handset and
the base station can both be used with most other GAP compatible units irrespective of
manufacturer. However the GAP protocol cannot guarantee that all functions may be accessed.
1. On Base station: Press =/O. Select REGISTRATION. Press =/O to confirm.
2. On DECT handset: Press . Select REGISTRATION. Press OK.
Enter PIN code (default code is 0000). Press OK.
3. If the registration is successful the unit will return to standby within one minute.
Intercom / internal call
1. Press or C/ .
2. On Base station: Use
v
or
V
to select the desired DECT handset. Press =/O.
On DECT handset: Enter call number 1-5for the desired DECT handset or press 7for
base station. Press 9to call all units.
3. A tone will be heard if an external call comes in while an internal call is in progress. End the
internal call and then answer the external call.
Transferring calls/conference between units from DECT Handset
When an external call is connected;
1. Press .
2. Select INTERCOM. Press OK.
If using more than 2 handsets: Enter call number 1-5for the desired handset or press 7
for base station. Press 9to call all units.
3. To transfer: press L,
for conference: press and hold *.
Transferring calls/conference between units from Base station
When an external call is connected;
1. Press =/O.
7
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro Comfort 4005 V2 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro Comfort 4005 V2 in the language / languages: English as an attachment in your email.

The manual is 0,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro Comfort 4005 V2

Doro Comfort 4005 V2 User Manual - German - 18 pages

Doro Comfort 4005 V2 User Manual - Dutch - 18 pages

Doro Comfort 4005 V2 User Manual - French - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info