477731
4
Zoom out
Zoom in
Previous page
1/20
Next page
English
Installation
This device is intended for the analogue telephone network lines in AT, BE, BG, CH, CY,
CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU, IE, IS, IT, LV, LT, LU, MT, NL, NO, PL, PT, RO,
SI, SK, SE.
Connection
1. Connect the curly cord to the handset and then to the socket marked q on the unit.
2. Connect the mains adapter (if included) to an electrical wall socket and then to the
socket marked DC 9V on the unit.
3. Connect the telephone line cord to a network wall socket and then to the socket marked
K on the unit.
4. Lift the handset and listen for the dial tone.
5. Position the cables in the grooves underneath the unit.
Note!
Use supplied telephone line cord, an existing cord from a previous phone may not be compatible.
Setup
1. Press w.
2. CONTRAST is displayed. Press 0 to change, press V to continue without changes.
3. Select desired contrast setting (2=normal) using v/V. Press 0.
4. TIME/DATE is displayed. Press 0 to change, press V to continue.
5. To set hour (00-23) use v/V. Press 0.
6. Select desired minute using v/V. Press 0.
7. Select desired month using v/V. Press 0.
8. Select desired date using v/V. Press 0.
9. Select desired weekday using v/V. Press 0.
10. ENGLISH is displayed. Press 0 to change, press V to continue.
11. Select desired language using v/V. Press 0.
12. VOICE is displayed. Press 0 to change, press V to continue.
13. Select ON or OFF using v/V. Press 0.
14. RECALL is displayed. Press 0 to change, press V to continue.
15. Select the desired setting using v/V. 100 for AU/UK/EU, 270 for FR and 600 for
NZ. Press 0.
16. ANSWER DELAY is displayed. Press to change, press V to continue.
17. Select 2, 4 or TS using v/V. Press 0.
18. ANSWER MODE is displayed. Press 0 to change, press V to continue.
19. Select ANSWER/RECORD or ANSWER ONLY using v/V. Press 0.
20. PIN CODE is displayed. Press 0 to change, press V to continue.
21. Use the numeric keypad to enter the code (default=0000). Press 0. Enter the new
code (4 digits). Press 0. If the code is not accepted/correct you will hear a short beep,
repeat step 19 and 20.
22. PRIVACY MODE is displayed. Press 0 to change, press V to continue.
23. Select ON or OFF using v/V. Press 0.
To change settings for time, language or contrast etc. later on, repeat steps as above.
1
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro Comfort 3005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro Comfort 3005 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro Comfort 3005

Doro Comfort 3005 User Manual - German - 18 pages

Doro Comfort 3005 User Manual - Dutch - 18 pages

Doro Comfort 3005 User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info