762094
6
Zoom out
Zoom in
Previous page
1/96
Next page
1
English
Connection
1. Connect the spiral cord to the handset and to the socket marked Q on
the telephone.
2. Hang up.
3. Connect the mains adapter to the mains power wall socket and to the DC
9V socket on the telephone.
4. Insert batteries according to the markings in the battery compartment
underneath the phone (see Batteries chapter).
5. Connect the telephone cord to the network wall socket and to the socket
marked t on the telephone.
6. Lift the handset and listen for the dial tone.
Batteries
In order to prevent caller identication, memory and other functions being lost in
the event of power failure, the telephone requires four type AA 1.5V batteries.
When the batteries are running low, the symbol will illuminate.
Only use high quality batteries.
1. Unplug the telephone cable and remove the cover on the base of the
telephone.
2. Insert the batteries according to the markings for plus and minus terminals.
3. Replace the battery cover.
Tochangebatteriesintheremotecontrol
If the remote control ceases to function change the battery as follows:
1. Use a Phillips screwdriver to unscrew the screw on the back and separate the
parts by gently turning a at screwdriver in the groove on the underside.
2. Exchange the 12V battery for a new one following the markings for plus
and minus terminals.
3. Reassemble the parts and screw together.
Wall mounting
1. Attach the wall bracket to the base of the telephone as well as two screws vertically
83 mm apart.
2. Position the telephone above the screws and slide it downward into place.
3. Remove the hanging peg (by the hook switch) by pushing it upwards.
4. Rotate the hanging peg 180 degrees, and then replace it.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro AlertEasy 314C at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro AlertEasy 314C in the language / languages: English, Danish, French, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info