300955

Doro 915c Manual

7
Zoom out
Zoom in
Previous page
1/72
Next page
2
English
Connection
Connect the curly cord to the handset and to
the socket marked
y
on the telephone.
Connect the telephone line cord to a
network wall socket and to the
K
socket
on the back of the telephone.
Connect the mains adapter to the mains
power wall socket and to the DC 9V socket
on the telephone.
Lift the handset and listen for the dial tone.
IMPORTANT: Use the telephone line cord
supplied, an existing line cord from a
previous phone may not be compatible
Batteries
Four AAA alkaline batteries are needed as
backup for the call memory and speakerphone.
When
BATT. LOW
is displayed, replace all 4
batteries. Use only AAA alkaline batteries of
good quality (not included).
Note! Before installing or changing the
batteries, make sure that the telephone is
not connected to the telephone network.
Remove the battery cover and insert the
batteries ensuring correct battery polarity
is observed.
Replace the battery cover and reconnect
the telephone line cord.
Basic setup
Before using the telephone the rst time, the
following basic settings should be made.
After conrming a setting, the next setting is
automatically displayed. To skip to the next
setting, press .
The phone will return to standby mode after
30 seconds of inactivity or when pressing C.
On rst setup the display will show
00:00
.
Press and hold
*
for about 5 seconds
until the hour ashes.
Use
v
/
V
to change the value and
conrm with .
Repeat step 2 to set the minutes, day and
month.
1.
2.
3.
4.
1.
2.
1.
2.
3.
ENGLISH
is displayed.
Use
v
/
V
to select the desired language,
then conrm with .
-2- CONTRAST
Use
v
/
V
to set the display contrast
setting (1–4), and conrm with .
KEYT. ON
Use
v
/
V
to set key tone ON/OFF, and
conrm with .
-100- FLASH
Use
v
/
V
to set the ash key time
(100/300/600 ms) and conrm withand conrm with .
The standard setting is 100 for most
countries, 300 for France/Portugal, 600 for
New Zealand.
LED OFF
Use
v
/
V
to enable/disable the LED
indicator for new calls, and conrm with .
TONE
Use
v
/
V
to select either tone or pulse
dialling mode, and conrm with .
Note!
If unsure of which mode to use, select
TONE as this works in most locations.
-1-RING TYPE
Use
v
/
V
to select one of 3 ring tones,
and conrm with .
Basic setup is now complete
Wall mounting
The telephone can be wall mounted using an
optional wall mount bracket. The wall mount
bracket is available as an accessory, part
number WB200/300 in white or black.
Fix the wall mount bracket on the back of
the telephone.
Secure two screws, vertically positioned 83
mm apart.
Activate the hanging peg (located by the
hook switch) by rotating it 180 degrees.
1.
2.
3.
Installation
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro 915c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro 915c in the language / languages: German, Danish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 7,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doro 915c

Doro 915c User Manual - English - 14 pages

Doro 915c User Manual - Dutch - 9 pages

Doro 915c User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info