762084
16
Zoom out
Zoom in
Previous page
1/20
Next page
14
English
Remote activation
If you have forgotten to turn the machine on, you can do so by remote access.
1. Call the answer machine. It will answer after approximately 10 rings.
However, if the RemotePIN code is still 0000, it will not reply.
2. EntertheRemotePINcode(seepreviouspage).Onebeepconrmscorrectcode.
3. Any new messages are played back, or press 1 to stop.
4. Press 0 (off=2 beeps, on=1 beep).
5. Hang up.
Remote control
This machine can be remote controlled using the keys of an ordinary tone dialling telephone.
The RemotePIN code must be changed before remote control is possible. (See description
above).
1. Check that RemotePIN code is no longer 0000 (or remote control will not be possible).
2. Call the answer machine.
3. Press * when the outgoing message is played.
4. EntertheRemotePINcode(seepreviouspage).Onebeepconrmscorrectcode.
5. Any new messages are played back, or press 1 to stop.
6. Select a remote control command, see below.
7. Hang up.
Command Function
1 .......................... Stop
2 .......................... Play all messages
3 .......................... Play new messages
4 .......................... Repeat/skip to previous message
5 .......................... Erase single message during playback
6 .......................... Skip to next message
7 .......................... Select answer mode (normal=2 beeps, only otg msg=1 beep)
8 .......................... Playback of outgoing message
9 .......................... Record new outgoing message, Stop=#
0 .......................... Turn TAM off/on (off=2 beeps, on=1 beep)
Please note!
If the machine doesn’t respond to the remote control commands, try pressing the telephone buttons for a longer
or shorter time. In normal cases, the answer machine should react to tones approximately 0.5 – 1 seconds in
length, but longer tones may be necessary in certain telephone networks.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro 650R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro 650R in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info