762084
12
Zoom out
Zoom in
Previous page
1/20
Next page
10
English
System settings
System PIN is 0000 on delivery.
1. Press Menu. Scroll to Settings. Press OK.
2. Scroll to Setup Base. Press OK.
3. Scroll to desired function e.g. Exchange Code. Press OK.
4. Enter the required setting. Press OK.
Dial Mode The dial mode setting for UK must be Tone (Europe only).
Exchange Code Enter the digit that obtains an external line and the telephone will
insert a pause automatically when a number starts with that digit.
Change PIN You can change the PIN code (0000 on delivery).
Default Reset Resetbaseunit,conrmwithYes.
Expanded system (+1)
All handsets included in the package are registered to the base unit already. The handset
number used for internal calls is shown in the display on standby.
The base unit should be positioned centrally so that the coverage area is roughly equal for all
handsets. You can register up to 5 handsets to one base unit.
This model is GAP (Generic Access Prole) compatible, which means that the handset and the base unit can
both be used with most other GAP compatible units irrespective of manufacturer. However the GAP protocol
cannot guarantee that all functions may be accessed.
Register a new handset
All new handsets that are to use the base unit must be registered.
1. Hold down the J search button on the base unit for approx. 12 seconds.
2. Press Menu. Scroll to Settings. Press OK.
3. Scroll to Register Handset. Press OK.
4. Scroll to required base unit (*=previous reg.). Press OK.
5. Enter the base unit PIN code (0000 on delivery). Press OK.
6. If the registration is successful the handset will return to standby mode within one
minute.
INT calls
1. Press Int.
2. Scroll to selected handset. Press OK.
A tone will be heard if an external call comes in while an internal call is in progress. You must
then terminate the internal call by pressing L, in order to be able to receive the external
call by pressing O.
Transferring calls/Conference between handsets
1. While an external call is connected on line.
2. Initiate an internal call as described above.
3. Press L to transfer the call or press Conf for conference.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro 650R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro 650R in the language / languages: English as an attachment in your email.

The manual is 1,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info