762080

Doro 615R Manual

5
Zoom out
Zoom in
Previous page
1/12
Next page
3
English
Settings
1. Press º. Press commands as listed below, e.g. ringer signal volume.
2. The display shows the current status, e.g. P-5 2-5 means command 5, current
setting 2 of 5 positions.
3. Scroll to desired setting with {/}, e.g.5 for max. Press º.
Command Function
2 .........................Time format (24=24-hr, 12=12-hr)
4 .........................Ringer signal type (1=type 1....6=type 6)
5 .........................Ringer signal volume (1=min....5=max)*
6 .........................Key beep (On=On, OFF=Off)
7 .........................Tone/Pulse (1=tone/normal, 2=pulse)
8 .........................Auto Answer, i.e. the handset responds to incoming calls
when it is lifted from the base (On=On, OFF=Off)
9 .........................Resetting (Enter PIN code, 0000 when supplied)
R .........................Flash time (100=standard, 300=France/Portugal)
*Ringer signal can be connected/disconnected in standby mode with * ( =off).
PIN code
The PIN code (four digits) provides protection against unauthorised use of certain
functions.
1. Press º *.
2. Enter the current PIN code (0000 when supplied). Press º.
3. Enter the new code. Press º.
4. Enter the new code again. Press º.
Expanded system (only +1…)
The handset number used for internal calls is shown in the display on standby mode.
The base unit should be positioned centrally so that the coverage area is roughly equal
for all handsets.
It is not possible to add extra handsets at a later point.
INT calls
1. Press I until the display shows int.
2. Enter the allocated number of the handset that you wish to call, 1 - 4.
A tone will be heard if an external call comes in while an internal call is in progress.
Terminate the internal call by pressing L before receiving the external call with O.
Transferring calls/Conference between handsets
1. An external call is connected.
2. Initiate an internal call as described above.
3. Press L to transfer the call or press O for conference.
… 5 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro 615R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro 615R in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info