762028
6
Zoom out
Zoom in
Previous page
1/70
Next page
English
6 www.doro.com
Installation
Adapt your telephone the way you want it!
This product being modular offers several interesting installation possibilities.
It can be easily converted into a wall telephone, you can move or reposition
the cradle, the cable can be tted in either direction, and the front fascia of the
handset can be changed.
Various accessory modules are also available, please contact DORO or your
retailer for more information.
Please refer to the illustrations on page 17 on how to t and remove the modules.
The illustrations show 1015CS.
Positioning cradle and cable
Select the cradle position (right or left-hand side) and cable routing (back or front)
to suit your installation.
1. Locate the metal retaining plate holding the modules in place, press down
on the tab in the middle of the plate and push sideways to remove.
2. Unplug the cradle from the module.
3. Decide on the position of the cradle and cable routing for your installation.
4. If necessary remove any protective socket cover from the cradle or telephone
module.
5. Connect the cradle and telephone module using the cable contact plug.
6. Slide the metal retaining plate into the locating grooves by pushing sideways.
7. Fit any remaining protective covers to exposed contact sockets.
Connection
1. Ensure the cable contact plug has been correctly tted to the cradle and
dialler module, and the metal retaining plate covers both units equally.
2. Connect the handset curly cord to the socket on the cradle module.
3. Connect the mains adaptor to an electrical wall socket, and the line cord to
a telephone network socket.
4. Lift the handset and listen for the dial tone.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doro 1010c at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doro 1010c in the language / languages: English, French, Polish as an attachment in your email.

The manual is 2,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info