Manual Doorbird D20x Series IP Video Door Station (page 12 of 88) (English, German, French, Italian, Spanish)

784419

Zoom out

Zoom in

1/88

1212

Power supply via PoE (as an alternative)

To power the video door station via a PoE switch (e.g. D-Link DGS-1008P) or

PoE injector (e.g. TP-Link TL-PoE150S) in accordance with the PoE standard

IEEE 802.3af Mode A, the four wires bearing the numbers 1, 2, 3 and 6 of a

Cat.5 cable or better are to be used. A Cat.5 cable or better must be used as

network signals can only be transmitted over completely insulated, shielded

and twisted cables. If you use PoE as a source of power, the WiFi interface of

the video door station is automatically inactive, and the four wires for PoE

then simultaneously form the data link. The video door station won’t start

if your PoE Switch or PoE injector does not support the PoE Standard IEEE

802.3af Mode A (see Diagnostic-LED and Diagnostic-Sounds).

1. Disconnect the PoE switch or PoE injector from the power grid.

2. Place the network cable in the installation site of the video door station.

Do not combine the power supply from the power supply unit (mains adaptor)

with the power supply via PoE.

STEP 5: FURTHER CONNECTIONS (OPTIONAL)

If desired, connect additional wires to the installation site of the video door

station. The wires or connection options mentioned in this section are optional.

Be sure to use

four insulated,

shielded and

twisted wires of

a network cable

in accordance

with the Cat.5

standard or

better.

Connecting the unit to a network

You can connect the video door station to your existing

network via WiFi, or alternatively use a network cable

(Ethernet). For reasons of network stability, we principally

recommend using a network cable, as WiFi is sensitive to

interference (range, house walls acting as shields, relia-

bility of performance, third party WiFi networks, wireless

transmitters causing interference in the area, etc.).

The video door station can be powered by PoE or using

the power supply unit provided. If you use PoE as a

source of power, the WiFi interface of the video door

station remains inactive.

Use only four wires (1, 2, 3 and 6) of a network cable that

meets the Cat.5 standard or a better one. The other four

wires of the network cable (4, 5, 7 and 8) are not required.

Connect the network cable in the house to your

Internet router or to your PoE switch or PoE injector

that is connected to your Internet router.

6 (R-)

3 (R+)

2 (T-)

1 (T+)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Doorbird D20x Series IP Video Door Station in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Doorbird D20x Series IP Video Door Station Manual

Product: