784270
17
Zoom out
Zoom in
Previous page
1/76
Next page
ENGLISH
17
MAINTENANCE OF THE FRONT PANEL
Cleaning and maintenance instructions
All of our front panels are made of high-quality
materials and are designed for a durable lifetime.
Since this kind of devices are usually installed in
unprotected outdoor areas, they are exposed to
adverse weather conditions and aggressive substances,
especially close to frequently used roads, in coastal
and industrial areas. Therefore, please consider the
following care instructions. Unfortunately, we cannot
accept any liability for damage if these instructions
are not being observed. Aggressive dirt such as bird
droppings should be removed as quickly as possible.
NOTICE Aggressive stains such as bird droppings
should be removed as soon as possible.
NOTICE Never use abrasive detergents such as steel
wool or scouring milk!
Warm water is usually sucient, if necessary with
a little detergent, a soft cloth or brush. Plastic parts
must not be treated with metal care products.
Remove all residues of cleaning agents or lubricants to
avoid stains or discolouration after the maintenance.
Stainless Steel
Only high-quality stainless steel is used for all available
DoorBird devices. However, high-quality stainless steel
can also rust, as approx. 70% of stainless steel is made
of iron. Rust resistance is only achieved by a protective
layer (also called passive layer), which covers the iron
like a skin. This protective layer consists essentially of
chromium and other precious metals.
Iron particles, grinding dust and chips deposited on
stainless steel can lead to corrosion (rust film). These
iron particles can be found everywhere, but especially
in coastal and industrial areas and close to frequently
used roads. Please remove ferrous deposits immediately,
as they will attack your device and lead to real rust if
not removed. To remove rust, simply wipe off the dust;
in addition, a care product is recommended, e.g. WD
40, available e.g. at Amazon for less than € 5.00. Simply
apply in a thin layer and rub in. The same applies if rust
appears on the engravings on the stainless steel surface.
Cement or lime splashes should be carefully removed
as soon as possible with a wooden spatula before
hardening.
The following cleaning detergents are not to be used
as they reduce corrosion resistance:
products containing chloride and hydrochloric
acid
Bleach (in case of accidental use, rinse thoroughly
with water)
Silver polish
After the cleaning with clear water wipe with damp
cloth and rub dry to avoid lime traces. Lime residues
can be avoided by using demineralised water.
Stainless steel PVD coated
PVD coated, chrome-plated or gold-plated surfaces are
recommended to be cleaned with a grease-
dissolving detergent and clear water or with a clean
and dust-free microfibre cloth. For high-gloss surfaces,
use a scratch-free cloth (e.g. cleaning cloth for glasses,
furniture polishing cloth, etc.).
Lacquered surfaces
Clean painted surfaces and lettering with a soft,
scratch-free cloth moistened with a mild soap solution
(e.g. cleaning cloth for glasses, furniture polishing cloth,
etc.). To prevent stains or discolouration, the detergents
should be wiped off without leaving any residue.
Be particularly careful with lettering in order not to
damage the film or the print.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doorbird D1102V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doorbird D1102V in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 13.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doorbird D1102V

Doorbird D1102V Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info