784270
8
Zoom out
Zoom in
Previous page
1/76
Next page
8
SWITCHING OFF POWER
Switch off the power to all wires leading to
the assembly location, i.e. the door chime,
electric door opener, power supply unit for
the video door station etc.
145 cm
57 in
130 cm
51.18 in
A8001 Wedge corner
wall-mount adapter
(7.5°, mounts vertical
down or up), sold
separately
A8002 Angle corner
wall-mount adapter
(45° horizontal, mounts
left or right), sold
separately
When choosing the assembly location, consider the lighting conditions. Avoid direct sunlight, direct backlight
and reflective surfaces.
NOTICE Do not expose the device to direct sunlight. The housing temperature can exceed the maximum
allowed temperature limit. This can result in damage of electric and mechanic components of the
device and injuries especially when touching exterior parts of the device. White and bright silver-colored
front plates absorb less sunlight than dark ones.
NOTICE An image sensor must not be exposed to direct sunlight for an extended period of time. Direct sunlight
will “blind” the camera and may permanently bleach the small color filters on the image sensor chip.
Any defects caused by direct sunlight are not covered by warranty.
Only for D1101V & D1102V
We offer additional wall-mounting kits for D1101V and D1102V Surface-Mount with a wedge corner wall-mount
adapter (7.5° vertical down or up) and alternatively an angle corner wall-mount adapter (45° horizontal, mounts
left or right).
DISMANTLING THE EXISTING
DOORBELL
Should there already be a doorbell or door station on
the exterior wall of the house, please remove it.
DETERMINING THE ASSEMBLY LOCATION
The device uses an ultra wide-angle hemispheric
lens so that even when the person is a minimum
distance of 50 cm (19.68 in) away from the device,
a low installation height is sucient. The lens is
therefore not mechanically adjustable. The camera
lens should be located at an altitude of at least
145 cm (57 in).
You may check this prior to the final mounting.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Doorbird D1102V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Doorbird D1102V in the language / languages: English, German, French, Spanish as an attachment in your email.

The manual is 13.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Doorbird D1102V

Doorbird D1102V Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info