499354
21
Zoom out
Zoom in
Previous page
1/22
Next page
www.domo-elektro.be MS171
21
PREVENT OVERLOADING
The appliance will vibrate slightly if it is overloaded been overloaded. The blade
will very slowly or it will stop rotating altogether. In that case, the best thing to do is
switch the machine off for 15 minutes to allow it to cool down before using it again.
ADJUST SLICING THICKNESS (fig i)
The slicing thickness can be adjusted from 0-to 15 mm. Turn
the dial (knob) for adjusting thickness (4), to the desired
gauge. The thickness indicator at the top of the slicer shows
the selected thickness.
MAINTENANCE
Remove the pug from the mains.
Never immerse the machine in water.
Always clean the cutting machine immediately after use in
order to prevent drying of the remains of foodstuffs.
In order to remove foodstuffs rich in oil it may be necessary to use a detergent and
water to clean the machine.
Never use a pointed or sharp instrument to remove the remains of food from between
the blade and machine.
The machine cover can be cleansed with a damp cloth.
The blade, the support platform, the sliding carriage, the hand protection and the
foldable slab must be cleaned in water with non-abrasive detergent/soap. Clean then
rinse the parts thoroughly before reassembly.
Never use aggressive, abrasive cleansing products or scouring pads to clean the
electrical slicing machine.
Do not put the parts into a dishwashing machine.
The appliance must be completely clean, dry and cooled off before storing it.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo MS171 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo MS171 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info