775725
25
Zoom out
Zoom in
Previous page
1/52
Next page
25
DO988RKZ
www.domo-elektro.be
EN
· Avoid direct sunlight and heat. Direct sunlight may aect the acrylic coating. Heat sources nearby will
cause higher electricity consumption.
· Avoid very moist places. Too much moisture in the air will cause frost to from very quickly on the
evaporator, and your refrigerator.
· Before connecting your refrigerator to the power supply, check that the voltage stated on the rating
label of your appliance corresponds to the voltage in your home. A dierent voltage could damage the
appliance.
· The appliance must be grounded. The manufacturer is not responsible for damages that may occur as
a result of usage without grounding.
· After installation, leave the freezer for 8 hours before turning it on. This way the refrigerant can settle.
· Allow the appliance to run empty for 24 hours so the compartment can cool to the appropriate
temperature.
· This appliance is designed to operate in ambient temperature between 16°C and 38°C. If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly.
· The appliance may only be used indoors.
USE
TEMPERATURE CONTROL
The fridge is controlled with a temperature control knob located inside the
appliance.
Adjust the control knob as desired to suit your individual preference.
· COLDER: 0-4°C
· NORMAL: 4-7°C
· COLD: 7-10°C
· OFF
· The running time and temperature are aected by where the freezer is located, how often the door is
opened and the temperature of the room the freezer is located in.
· When you use the appliance for the rst time or after defrosting, adjust the control knob to the coldest
setting for at least 2 hours before introducing food to be stored, and then readjust to the middle
setting.
MOVING YOUR APPLIANCE
If the appliance is turned o for any reason, wait for 10 minutes before turning it back on. This will allow
the refrigeration system pressures to equalise before restarting.
· Turn o the appliance and unplug it from the mains socket. Remove all food. Also remove all mobile
parts (shelves, accessories, etc.) or x them into the fridge to avoid any shock.
· Relocate and install. If the appliance has been left on its side for any length of time, leave it standing
upright for at least 10 minutes before turning on.
Your appliance uses isobutane (R600a) as a refrigerant. Although R600a is an environmentally friendly
and natural gas, it is explosive. Therefore you should be careful during shipment and installation to
prevent your appliance’s cooler elements from being damaged. In the event of a leak caused by damage
to the cooler elements, move your fridge from open ame or heat sources and ventilate the room where
the appliance is located for a few minutes.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO988RKZ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO988RKZ in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info