775776
76
Zoom out
Zoom in
Previous page
1/116
Next page
76
DO987BFK
IT
· La spina è l’unico modo per scollegare l’apparecchio dall’alimentazione
di rete. Pertanto assicurarsi che la spina sia sempre facilmente
raggiungibile. Per scollegare l’alimentazione verso l’apparecchio,
spegnere quest’ultimo poi estrarre la spina dalla presa.
· Lapparecchio deve essere collegato a una messa a terra. Il produttore
non è responsabile per danni causati dal mancato utilizzo della messa a
terra.
· Una volta installato l’apparecchio, attendere 8 ore prima di accenderlo.
In questo modo si garantisce il posizionamento del refrigerante.
· Lasciare l’apparecchio acceso vuoto per 24 ore in modo che l’interno si
rareddi raggiungendo la temperatura appropriata.
· Lapparecchio è progettato per funzionare a una temperatura ambiente
compresa tra 16 °C e 38 °C. Lapparecchio non funzionerà correttamente
in un ambiente con temperatura inferiore o superiore.
· Lapparecchio può essere utilizzato solo in ambienti chiusi.
· Il congelatore emette del rumore quando il compressore fa circolare il
refrigerante. Questo è normale.
INVERSIONE DELLAPERTURA DELLO SPORTELLO
Se si desidera spostare dal lato opposto le cerniere dello sportello, è consigliato contattare un riparatore
autorizzato per fare eseguire il lavoro. Prima di invertire l’apertura, controllare che la spina sia rimossa
dalla presa e che l’apparecchio sia vuoto.
Una volta invertita l’apertura, attendere 8 ore prima di accendere l’apparecchio. In questo modo si
garantisce il posizionamento del refrigerante. Si consiglia di usare un cacciavite a punta piatta, un
cacciavite con punta a stella e una chiave (non forniti) oltre ai seguenti componenti forniti.
Piastrina di copertura per cerniera
,QVWDOODWLRQ

Door Reversibility


Left Aid-Closer on Upper Door x 1 Left Aid-Closer on Lower Door x 1
 nscrew top hinge cover and disconnect connectors of door switch and harness.
2.Unscrew top hinge
3.Remove the pin with a screwdriver and filp the hinge bracket. Then refit the pin to hinge bracket
unscrew
screw
8
Stop sportello superiore
,QVWDOODWLRQ

Door Reversibility


Left Aid-Closer on Upper Door x 1 Left Aid-Closer on Lower Door x 1
 nscrew top hinge cover and disconnect connectors of door switch and harness.
2.Unscrew top hinge
3.Remove the pin with a screwdriver and filp the hinge bracket. Then refit the pin to hinge bracket
unscrew
screw
8
Stop sportello inferiore
,QVWDOODWLRQ

Door Reversibility


Left Aid-Closer on Upper Door x 1 Left Aid-Closer on Lower Door x 1
 nscrew top hinge cover and disconnect connectors of door switch and harness.
2.Unscrew top hinge
3.Remove the pin with a screwdriver and filp the hinge bracket. Then refit the pin to hinge bracket
unscrew
screw
8
1. Svitare le viti della piastrina di copertura per cerniera e rimuovere la piastrina. Scollegare entrambi i
connettori dei cavi.
,QVWDOODWLRQ

Door Reversibility


Left Aid-Closer on Upper Door x 1 Left Aid-Closer on Lower Door x 1
 nscrew top hinge cover and disconnect connectors of door switch and harness.
2.Unscrew top hinge
3.Remove the pin with a screwdriver and filp the hinge bracket. Then refit the pin to hinge bracket
unscrew
screw
8
13
y
y
,QVWDOODWLRQ
1007NN
1071NN
6SDFH5HTXLUHPHQW
Keep enough space of door open.
Keep at least 50mm gap at two sides.
To do this adjust the two levelling feet at front of the unit.
If the unit is not level, the doors and magnetic seal
alignments will not be covered properly.
/HYHOOLQJWKHXQLW
13
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Domo DO987BFK at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Domo DO987BFK in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 19.26 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info